H-Channel for Enclosed Trailer Review Video

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

We have H channel you could use with the part #36281-955 which is 93-1/2 inches long but we don't have a way to cut it here. You'd have to cut it down to the size that you need.

The closest we have to match those measurements is going to be the H-Channel for Enclosed Trailer #36281-955 which has an internal width of 1.027" and a height of 2". We do also have a C-Channel #362213-955 which has an inside measurement…

Hey John, I completely agree with your opinion of our search bar. I have to use it all day long and hate how it functions. We've brought this issue up quite a bit on our side and were told that the search bar is being worked on and should improve…

The overall width of the MORryde RV Cargo Sliding Tray - 72" x 20" - 2 Way Slide - 80 Percent Extension - 500 lbs part #MR74FR is 19.74" which is measured from the outside of each rail on either side. The tray width is only…

I recommend going with the Provider 215/75R17.5 Radial Trailer Tire #TTWP15175 as it is the best tire we have in that size. The Provider uses a better siping pattern than the other options so that you get the best traction whether it is wet or dry on…

I spoke to TRC and they said the inside channel of the H-Channel for Enclosed Trailer part # 36281-955 is 1.027" wide.

The Kenda K353 Bias Trailer Tire - 5.30-12 - Load Range C #AM10066 has a speed rating of 65 mph and like you mentioned a max load capacity of 1,045 lbs at 80 psi. However you should make sure that the combined maximum load rating is higher than the…

The Dexter "8-248" is a hub assembly for 3,500 lb axles that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns therefore you would need to…

Here is a list of the tools needed to install the etrailer Enclosed Trailer Transition Plate #e32JR: - Tape Measure - Drill - Hex Drive Socket Adapter - 10mm Socket - 13mm Socket I have also added a link below to the instructions of the #e32JR for…

For a 200 lb trailer ramp door we have the Conventional Ramp Door Spring part #362SA8HD which would work great as it has a 230 lb capacity. You'd need to have a professional wind it for you but it would easily work great for a 200 lb trailer ramp…

The best option we have for you is the Continuous Stainless Steel Hinge part #SH300. This hinge is 6' long, 3" wide, and has 1" long knuckles. The overall length of the hinge will be an exact fit but the width will be about 1/4"…