bing tracking image

Redarc Brake Controller 331-TPSI-002 Review

content loading

Customers compare 331-TPSI-002 to these similar products

Products Featured in this Video

Review of Redarc Accessories and Parts 331-TPSI-002

Speaker 1: Today, we're taking a look at a mounting panel for the Redarc Tow Pro Elite trailer brake controller control knob. This mounting panel creates a factory look for your installed Tow Pro Elite brake controller. Provides a nice, clean backdrop for the control knob that installs in your dash or console. It's made from a durable plastic construction. I do want to show you the measurements real quick, and then I'll actually take a control knob, and show you how to install it in the bracket.Edge to edge, this direction is about 7/8 of an inch. Edge to edge going this direction is about an inch and a quarter.

So, it definitely keeps that compact low profile out-of-the-way design. So here's the components of the control knob that we'll be using for the installation to the bracket. Basically what you do is you take it, and you place it through and then you take your mounting nut, and you reinstall that. And then you take your control knob, fit it on there. And that's all there is to it, so that is what it will look like, once installed in your vehicle.That's going to do it for today's look at the mounting panel for Redarc Tow Pro Elite trailer brake controller control knobs..

Leon C.


As per text earlier on the 2008 ram 1500 4x4 ,which 2 wiring harness do I need.i got the part #s from Windish RC catalog. So what is total cost of all the components Ill need and Ill order directly from you TKS

Etrailer Expert

Chris R.


If your Ram is equipped with the factory 7-Way you'll just need part # 331-EBRH-ACCV2 for the Redarc Brake Controller itself and part # 3020-S for the Adapter Harness that you'll use to connect the unit to the factory harness beneath the truck's dash. If you instead just have the factory 4-Way connector you'll again need the brake controller and adapter harness, plus the Wiring Kit # ETBC7 .

Info for this part was:

Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Ryan G
Installed by:
Ryan G
Employee Conner L
Test Fit:
Conner L
Employee Bradley B
Test Fit:
Bradley B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.