bing tracking image

Redline Tires and Wheels RG03-120 Review

content loading

Customers compare RG03-120 to these similar products




Products Featured in this Video



Review of Redline Accessories and Parts RG03-120


Today we're going to take a look at the replacement drive-in trailer hub wheel studs. These are a 5/8 inch diameter by three and 1/8 inches long and has a store quantity of four of them. These 5/8 inch studs are designed to replace damaged wheel studs on your trailer hub. The raised spline portion right here on the stud is what will be driven or pressed into your trailer hub. The stud is what'll go through the bolt hole on your trailer wheel and when used with a wheel lug nut, will hold your tire wheel to your axle. On the head of it it's stamped as a grade eight bolt. The thread size then is 5/8 inch diameter.

It's 18 threads per inch and it does use the 5/8 by 18 lug nuts. The overall length which would be measured from the bottom of the head to the very end of the bolt, if we put a ruler on that, it's going to be right at three and 1/8 inches. The threaded portion, length on that is going to be right at two inches and then the spline diameter, which is the part that gets pressed into your trailer hub, the diameter on that is 11/16 of an inch. That should do it for the review on the replacement drive-in trailer hub wheel studs, 5/8 inch diameter, three and 1/8 inches long, and a quantity of four of them.


Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.