bing tracking image

Redline Trailer Suspension - Leaf Spring Suspension - 29-31 Review

content loading

Customers compare 29-31 to these similar products




Products Featured in this Video



Review of Redline Trailer Suspension 29-31


Today we're gonna take a look at the Front or Center or Rear Hanger for Double-Eye Springs. It's 3 5/8 inches tall and has a 9/16 diameter bolt hole. This hanger can be configured to work in the front, the rear or the center position to suspend your double-eyed leaf springer equalizer. It provides the attachment point for the leaf springs, and this hanger will suspend your springer equalizer from the trailer frame. It is designed to fit 1 3/4 inch wide double-eye springs with 9/16 diameter eyes. It is designed to work with a 9/16 diameter bolt that we do sell separately on our website, and it's usually listed on this product page as a related project. Now to just give you a few dimensions on this. We're going to measure the overall dimension, so from the very bottom up to the very top.

It's going to be right at 4 1/4 inches tall. The width on it, from side to side, is going to be right at 2 3/8 inches wide, and the total depth is going to be right at 3 inches. When they do size the hangers, they call this one a 3 5/8 inch tall, and basically what they're measuring is from the center of this hole up to the top. If we go center, it's going to be right at 3 5/8 inches tall. Then the inside width on this is going to be right at 1 7/8 inches. That should do it for the review on the Front or Center or Rear Hanger for Double-Eye Spring, 3 5/8 inches tall and with a 9/16 diameter bolt hole..


Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.