bing tracking image

Redline Trailer Suspension - Leaf Spring Suspension - APS1 Review

content loading

Customers compare APS1 to these similar products




Products Featured in this Video



Review of Redline Trailer Suspension APS1


Today we're going to be taking a look at part number APS1. This is the single-axle trailer hanger kit for double-eye springs from Redline. This system is designed to attach two leaf springs, which are going to sold separately, to your trailer frame. You can use the table on the product's product page to help determine the hanger location based on the type of leaf springs that you have. This is designed to achieve 4 1/4-inch or 4 1/2-inch clearance between the trailer frame and the axle, again, depending on your axle size. It's going to include two 1 1/2-inch-tall front hangers. It's also going to include two 7/8-inch-tall rear hangers and they have the steel bushings on the inside.

They also have indicators right here on the top that's going to indicate which side is the top. The flat portion is going to face the front of the trailer. The open end is going to face the rear of the trailer and then the top portion is going to be the portion that needs to be welded. It's also going to come with four 3 1/8-inch-long shackle straps, six 3-inch-long by 9/16-inch-diameter shackle bolts, as well as the 9/16-inch-diameter nuts. This is designed for use on trailers with single 2,000-pound to 7,000-pound axles and it does not include the components for mounting the axle to the springs. That's going to do it for our review of part number APS1. This is Redline's single axle trailer hanger kit for double-eye springs.

.


Info for this part was:

Employee Kathleen M
Video by:
Kathleen M
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.