Reese Fifth Wheel Installation Kit - Semi-Custom - RP30035-520 Review Video

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will need to measure the diameter of the spindles where the seal and bearings ride. Check out the picture I attached that shows where this is. You will need an exact measurement so either a digital or dial caliper will be needed. To pick out the…

For a B&W 4 inch offset ball that will fit a B&W Turnover Ball gooseneck hitch on your 2015 GMC Sierra 2500 you will need #BWGNXA4085. I have linked a video review of this ball for you.

Though I do have an alternative option available, we do not carry the Coleman Mach line of AC units. We do occasionally have used parts listed, but unfortunately, internal parts for these cannot be mixed and matched between manufacturers. With that…

I attached a link to this page that has the install instructions for the Axle Riser Kit #LC382741 that you referenced.

According to Lippert, the mounting nuts should be torqued to 120 ft-lbs for the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift #LC382741.

I checked with Furrion and the 7 inch and 5 inch monitor version of the Furrion observation system #FOS05TASF use part #FR79SR. The smaller 4.3 inch size use the part #LC776462. The ball of the #FR79SR is 0.85" or 21.59mm and the ball of the…

For toy haulers and RVs like your 2012 Keystone Raptor 365LEV there is only one 8 lug bolt pattern and that is the 8 on 6-1/2 inch like the #AM20766 that you referenced.

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

So for your 2018 Ram 3500 we have semi custom rail kits like the part #RP30035-520 and fully custom fit kits like the #RP50085-58. The semi-custom kit is the easiest on price for sure but it requires quite a bit more time and involvement for the…

There is a version of the universal rail kit part #RP30035 that is available for your 2015 Ram 3500, part #RP30035-520 which has extra brackets, but for just the #RP30035 there isn't a set of instructions that are for your vehicle. If you already…

Reese has three rail kits available for your 2018 Ram 3500 short bed with the Ramboxes. The one I recommend is the part #RP50085-58 as it is a custom install kit that will give you the smaller dimension rails. The part #RP56010-53 is a kit that has…