bing tracking image

Roadmaster Tow Bars 910021-00 Review

content loading

Customers compare 910021-00 to these similar products




Products Featured in this Video



Review of Roadmaster Accessories and Parts 910021-00


Today we'll be reviewing part number 910021-00. This is the Roadmaster Quick Disconnect Tow Bar Base Assembly. This system is going to let you quickly and easily mount and remove the tow bar on your own. It's going to feature the full length steel crossbar so it's going to provide increased strength and support. It is designed to replace lost or damaged support bars on Roadmaster tow bar assemblies. Keep in mind that this will not work with RM-020 Tracker Tow Bar because the pins are actually different sizes. You're going to get one support bar, you're going to get the pair of quick disconnects.

It's going to feature the attachments for the motorhome side and the vehicle side. You're also going to get the two larger pins to attach the tow bar arms to the support bar. I've laid it out the way that it's going to install so you're going to have the quick disconnect crossbar with the quick disconnect bases. You're going to have the bolts. You're also going to get the safety plates. You're going to get the quick disconnect for the passenger and driver side.

This little slot down here is for a safety chain attachment. You're also going to get the lynch pins. This unit, once it's installed correctly, you're actually going to be able to attach the bar to these two areas here. This is the passenger side, that's the driver side. It also has an indicator that this needs to be facing upward. This little pin that's welded on is going to come up through this slot here and then you'll attach the lynch pin.

It does have a diagram on here that shows you the correct way to attach the lynch pin and the incorrect way. Make sure that you're always doing it correctly. Then it's going to mount to the tow bar mounting brackets that should already be installed on your vehicle with the included hardware so you're going to get the bolts, the flat washer, the lock washer and the nuts for each side. The overall length of the crossbar measuring from end to end is going to give us a measurement of about 32 1/2 inches. Center on center, the distance that we have between the mounting holes is going to measure 28 1/2 inches. So basically all of this over here behind the crossbar is going to mount directly to the vehicle.

Then you're going to be able to install this really easily with the quick disconnect system and remove it really easily as well. It's really going to come in handy if you want to get another set up to set up on another vehicle, then you can use the same crossbar and that's just a great system to have in place. Again, keep in mind that it will not work with RM-020 Tracker Tow Bar because the pins are different sizes. That's going to do it for our review of part number 910021-00. This is the Roadmaster Quick Disconnect Tow Bar Base Assembly. .


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Andrew L
Video by:
Andrew L
Employee Cole B
Installed by:
Cole B
Employee Randy B
Test Fit:
Randy B
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.