bing tracking image

Roadmaster Tow Bar Wiring RM-732 Review

content loading

Customers compare RM-732 to these similar products




Products Featured in this Video



Review of Roadmaster Accessories and Parts RM-732


Today we're going to be taking a look at the Roadmaster Brite-Lite wiring converter. The Brite-Lite converts a three wire electrical system on a towing vehicle to a two wire system on the towed vehicle. This unit allows the towed vehicle's lights to work in tandem with the towing vehicle's lights. The unit's going to help increase overall safety on the road. Testing does show that the Brite-Lite makes turn signals and brake lights brighter than other brands. The unit is very reliable.

It's going to feature an anodized aluminum heat sink to effectively dissipate heat, and it's going to use 16 gauge wiring for all the wires on the unit. Now this unit gets mounted on the towing vehicle by using the adhesive backing that's included. The right turn, left turn, and brake light wires on the towing vehicle needs to get connected to the input wires on the converter with butt connectors. Then you'll need to use a ring terminal to connect the ground wire from the converter to a clean metal surface on the towing vehicle. Now the white wire is going to be your ground wire, red wire is your brake wire, the yellow wire is for left turn, and the green wire is for right turn so you want to get these connected again to the wires of the towing vehicle using butt connectors. All the necessary connectors that are needed for your installation are not included, so those will need to be provided separately if you don't already have those. The two wires come out of the other side of the converter. These are going to get spliced into the wiring on the towing vehicle's wiring harness like a four-way flat or a seven-way connector. The yellow is left stop and turn, the green wire is right stop and turn, so once you have those spliced into the wiring harness like your four-way flat or seven-way, when you connect that to the harness on the towed vehicle everything's going to be working properly, the signal's going to be sent through that harness.

Again, this is designed to convert a three wire electrical system on your towing vehicle to the two wire system on the towed vehicle just to insure that the towed vehicle's lights work in tandem with the towing vehicle's lights. Measurements real quick of the actual converter. Going this direction that's going to give us a dimension of three inches. Going this direction it's going to measure about three and one quarter of an inch, and in the depth of the unit from front to back or the thickness is only going to measure about seven eighths of an inch thick. That's going to do it for today's look at the Roadmaster Brite-Lite wiring converter.


Questions and Comments about this Video

Info for this part was:

Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.