bing tracking image

Review of Roadmaster Base Plates - Removable Draw Bars - RM-035-1

content loading

Products Featured in this Video



Roadmaster Base Plates - Removable Draw Bars - RM-035-1 Review


Today we're going to take a look at the adapters for the 1" thick Jeep D-ring bumper mounts to Roadmaster motor home mount tow bars. This is a custom fit part. These are designed to fit the 1987 to 1995 Jeep YJ Off-Road bumpers, 1997 to 2006 Jeep TJ Off-Road bumpers and the 2007 and newer Jeep JK Wrangler and Wrangler unlimited Off-Road bumpers. And again these are designed to fit all these Jeeps with the 1" D-ring bumper mounts.And on a custom fit part like this I always like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle and it'll show if this will work for your application. Now these adapters allow you to use your Roadmaster tow bar to tow your Jeep behind your motor home. They basically will attach to the 1" thick shackle mounts on your bumper or the D-rings are usually attached.

It's a very fast, simple installation. You just simply attach these adapters right here to the tow bar arms in place of the quick disconnects and then what you'll do is take out this pin, remove the D-rings from your Jeep's bumper and then hook this portion right up to the shackle mounts and your tow bars will be connected right here.These adapters are designed to fit the shackle mounts that are 1" thick and they attach to the mounts using the holes we're the D-rings are usually mounted. The attaching pins right here, these will fit a 7/8" and 1" diameter mounting holes on the bumper mount. Now if the diameter is 1" you just end up using these sleeves. It includes these two sleeves.

You'll put a sleeve on. What you'll do is insert that in there and you slide that on. And that'll fill the 1" diameter. If it happens to be the diameter mounting of the mounting holes is 7/8" then you just use the pin, you don't have to use the sleeves. And then you just slide it across to attach it, connect your snapper pin and you'll be all ready to go.Now these adapters are compatible with all Roadmaster motor home mounted tow bars.

They'll work with the Black Hawk, the Black Hawk All-Terrain, the Black Hawk 2 All-Terrain, the Falcon, Falcon 2, the Falcon All-Terrain and the Falcon 5250 and the Night Hawk All-Terrain and the Sterling and Sterling All-Terrain Roadmaster tow bars. It does come with a nice set of detailed instructions. It'll describe how to hook everything up. But that should do it for the review on the adapters for the 1" thick Jeep D-ring bumper mounts to Roadmaster motor home mount tow bars.


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Video Edited:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Joshua S
Video by:
Joshua S
Employee Chris R
Video by:
Chris R
Employee Jonathan Y
Video by:
Jonathan Y
Employee Cole B
Installed by:
Cole B
Employee Ryan G
Installed by:
Ryan G
Employee Shane H
Test Fit:
Shane H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.