The Low-Down on the Roadmaster Hitch Riser for Tow Bars Video

The Roadmaster High-Low Adapter for Tow Bar - 2.5" Hitch - 6" Rise/Drop #RO24FR weighs a total of 14 pounds. It is important to note that any time you use a hitch adapter, you decrease the overall weight capacity of the hitch by 50%.

The Reese weight distribution shank part #RP69FR that you referenced has a towing capacity of 12,000 lbs and a tongue weight capacity of 1,200 lbs.

The Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs #C45036 sounds like it may have a little too much powder coat or something to cause resistance like you stated. Alternatively it could be the receiver side as well but it…

The parts in question are conical tooth washers. On the Curt weight distribution systems they go between the nuts and the head using the bolts that hold the head to the shank. I have included a picture that points them out for you. The tooth side…

I spoke with my contact at MaxxAir regarding the MaxxAir 2 Vent Covers like the Smoke #MA00-933073 that you were looking at and the Standard Covers like #MA00-933067. He said there are two primary differences between the two models. The first is that…

The Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR will allow you to raise your jet ski. This adapter is rated for use with hitch mounted accessories unlike the Blue Ox #BLU53XR you found which is only compatible with tow bars/flat…

There are a few troubleshooting steps to help you figure out why you have no power. I would start by making sure that there is not any corrosion or debris blocking your connection points. If they are clean or still no power after cleaning, I would…

In the past, Roadmaster did NOT recommend using the High-Low adapters for anything other than flat towing a vehicle, as they had never tested it for such a purpose. They're now saying the adapter can be used on hitch accessories, as long as its…

The Curt Echo Wireless Trailer Brake Controller #C51180 does require a 7-way RV-style vehicle socket on the tow vehicle in order to connect. The Pollak part you referenced is such a connector. The Echo simply plugs in to your diesel pusher's…

I took a measurement of the B&W Tow & Stow 3-Ball Mount #BWTS20049C and found from the base to the bottom of the receiver it measured about 8-1/4 inches while the overall vertical measurement was about 11 inches. I have made a photo for you…

I went out to our warehouse to take a look at the B&W Tow & Stow 3-Ball Mount #BWTS20049B referenced in your question. I measured a total length of right at 11 inches of the vertical adjustment shank on the ball mount. I have attached a short…

Since the Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional #RED44FR you have does not have any lights you are correct that it is not recognizing that a trailer is connected. What you will need to do is inspect the 7-way…