bing tracking image

Review of Stromberg Carlson Camper Jacks - 2 Base Pad Peak For Scissor And Stabilizer Jack - SC26MR

content loading

Customers compare SC26MR to these similar products




Products Featured in this Video



Stromberg Carlson Camper Jacks - 2 Base Pad Peak For Scissor And Stabilizer Jack - SC26MR Review


Hi everybody. My name is Andy with each trailer.com And today we're taking a look at the Stromberg Carlson Base Pad Peak, for Scissor Jacks and Stabilizer Jacks. And today we're gonna be taking a look at a set of two of these base pads. Now these base pads will replace the bricks and blocks normally needed when positioning your trailer jack. They work as a set of jack stands to provide a platform that supports the weight of your scissor jacks, stabilizer jacks, and even your tongue jack, to improve the stability of your parked and leveled RV. Now they have an individual weight capacity of 3,500 pounds.

And they provide a nice long landing pad for the foot of your jack. So let me just give you an idea of the measurement of that landing pad. You're gonna be sitting right at 9 1/4 inches long, by about 5 1/4 inches wide, on that landing pad. That's gonna give you a nice surface for the foot of your jack. And really these are going to save you time.

It's going to, they're gonna minimize the amount of cranking needed to position your jack. And it's also gonna save you individually, about 8 inches of cranking. Not only that, they're gonna offer you more stability. It's gonna keep the arms of your jack closer to your RV. So they're not going to be overextended.

And on soft surfaces, like hot asphalt or sand, they can be used with a 1 inch or 2 inch thick jack pads, which are sold separately, but you can find them on our related products section of this product page. And on the sides, as you have no doubt been seeing me use, there are finger holes, on the side panels here. They're gonna make it easy to carry this pad, and to retrieve it from under your RV, and to pull it out of storage, in your RV. Now, these pads are constructed from a durable, lightweight, high strength, plastic, and they're made in the USA and they are designed to be stacked. As you can see, the base has this cutout, so that it can sit on top of another one.

And by itself, I mentioned that you're gonna get about 8 inches here, of height. So as you can see, this pad by itself is 8 inches tall. And then if we go ahead and stack them, then they stack nice and easy. Let me get my tape measure here. That's gonna give you, right at 14 inches, altogether of height. So together, you're gonna get that 14 inches. And then I'm gonna go ahead and give you the measurements here of the base. Kind of give you an idea of the footprint it has. It'll be sitting right at about 12 7/8 inches long, by about 10 1/4 inches wide. And again, the individual weight capacity, is gonna be 3,500 pounds. They do have a two-year limited warranty. And again, this is for a set of two. If you're looking just to get one of these, you can find that one on our website, Item number SC86MR, or maybe you're looking for more than just two of these. We do have these in a set of four. You can find them on our website, Item number SC58MR. And if you're looking for more than four, we do have these in a set of five. You can find those five on our website, Item number SC38MR. Well, that's gonna conclude our look today at a set of two of these Stromberg Carlson Base Pad Peaks for the Scissor Jacks and Stabilizer Jacks. Again, my name is Andy. Thank you for joining me..


Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Andy C
Installed by:
Andy C
Employee Jacob T
Video Edited:
Jacob T
Employee Schuyler H
Video by:
Schuyler H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.