bing tracking image

Review of Stromberg Carlson Camper Jacks - 4 Base Pad Peak For Scissor And Stabilizer Jack - SC58MR

content loading

Customers compare SC58MR to these similar products

Products Featured in this Video

Stromberg Carlson Camper Jacks - 4 Base Pad Peak For Scissor And Stabilizer Jack - SC58MR Review

Hi everybody. My name is Andy with And today we're taking a look at the Stromberg Carlson Base Pad Peak for Scissor Jacks and Stabilizer Jacks. Now these base pads are going to replace the bricks and the blocks normally needed, when positioning your trailer jack. Now they're gonna work as jack stands to provide a platform that supports the weight of your scissor jacks, stabilizer jacks, and even your tongue jack, to improve the stability of your park, and leveled RV. Now they do have an individual weight capacity of 3,500 pounds. And they have a nice landing pad for the foot of your jack.

So let me go ahead and pull my ruler out here and just give you an idea of the size of that landing pad. So we're sitting right at 9 1/4 inches long by 5 1/4 inches wide. And these are really going to be a time-saver for you. They're going to minimize the amount of cranking needed to position your jack. It's going to save you 8 inches individually of cranking.

And they're also gonna give you more stability. They're gonna keep the arms of your jack closer to the RV. So they're not going to be overextended. So it saves time. It gives you more stability.

And as you no doubt have been seeing, these do have finger holes here, on the side, that's gonna make it easy to carry. Make them easy to retrieve from under the RV, or from storage in your RV. These are constructed of a durable, lightweight, high-strength plastic. They are made in the United States of America. And I'd mentioned the 8 inches you will gain, just to give you an overview of that measurement.

These are in fact 8 inches tall individually, and they are meant to be stacked, as you see here. This is for a quantity of four and the bottom here, you can see that there is a cutout there. And so they will just stack on top of each other, just like that. And when you have these pads stacked on top of each other, you are going to, you're gonna gain 14 inches. So together, these are 14 inches tall. So, some other measurements here that I would like to provide for you. Let me go ahead and take this one off, is I wanna give you the measurements of the base here, to kind of give you an idea of the size of the footprint, it'll have. So going across, we are sitting right at 12 7/8 inches long, and we're sitting at, in regards to the width, we're sitting right at 10 1/4 inches, wide. Now again, the individual capacity on this, on each one, is 3,500 pounds. And they do have a two-year limited warranty. Now again, this is for a quantity of four. As you see here. If you're interested in only one of these, we do provide the option for just one. You can find that on our website, Item number SC86MR, or if you don't need four and you only need two, we do have a quantity of two available on our website, Item number SC26MR. Or if you need more than four, we do have a quantity of five available on our website, Item number SC38MR. Now, these can be used on soft surfaces, such as hot asphalt or sand, but you would have to use jack pads on those. So you can find the jack pads that would work with these on our website, under the related products section of this product page. And you can take a look and see at the jack pads that we offer there. Well, that's gonna conclude our look today at the Stromberg Carlson Base Pad Peak for Stabilizer and Scissor Jacks, for a quantity of four. Again, my name is Andy. Thank you for joining me..

Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Andy C
Installed by:
Andy C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.