bing tracking image

Review of Stromberg Carlson Four Camper Jack - Trailer Jack 7 Pads - SC53VR

content loading

Customers compare SC53VR to these similar products

Products Featured in this Video

Stromberg Carlson Four Camper Jack - Trailer Jack 7 Pads - SC53VR Review

Hi there. I'm Michael with Today, we're gonna take a quick look at the Stromberg Carlson Base Pad Extreme camper and trailer pads. These pads are 7" tall so they are going to give you a great option for stabilizing your parked and leveled RV, or they can be used as a jack stand to support your trailer's tongue weight during storage. These are going to be a great option to replace your traditional cinder block or wood block to help minimize the amount of cranking that you need to do on your jacks to get your RV or trailer leveled. These are gonna be much lighter than your cinder blocks.

I can lift it up really with just a finger and thumb there. So very easy to lift. They also have these panel finger holes so that you can lift it up and carry it very easy. So a great alternative to a cinder block. Plus, these are made of a lightweight polycarbonate which is like bulletproof glass.

So they're gonna be very strong and they're not gonna retain water like your wood blocks would, so you don't have to worry about them getting moldy or anything like that. So they are gonna be a great option, still giving you that 7" of lift but without some of the difficulties that come with those other options. So these do support, they have a weight capacity of 6,000 pounds each. These can be stacked one to the other, so our height is obviously going to increase from 7" to about 12-1/4 of an inch tall but our weight capacity is going to decrease from 6,000 pounds to 3,500 pounds. So just something to be mindful of there: you can get a little bit more height but the weight capacity goes down.

There are several different options for the number of pads that come here. We can buy them individually using the part number that you see on the screen there or a set of two, set of four, or a set of six. We have all those here at You can find 'em using the part numbers that you see on the screen there. These can also be used with 1" or 2" thick base pads that will help to make sure that these will be nice and supported on soft surfaces like asphalt or sand, hot asphalt or sand.

Those are sold separately, but they will help to make sure that this rigid polycarbonate is not going to slip or anything in those loose soil kind of conditions. As far as our dimensions go, these are right at about 10" wide here at the top. At the bottom, from our solid edge to solid edge, it's right about 12". But if you go from the corners here, it's about 12-3/4 of an inch. So that's gonna be your max width at the bottom, so make sure that that's gonna work for your storage containers and that sort of thing. And then of course they are right at 7", about 7-1/8 of an inch tall. These are made here in the USA, so you can trust they're made to the high quality standards that we've come to know and trust for products that are made here in the US. So I think you'll be very happy with these as an alternative, like I said, to those cinder blocks and wood blocks, just being much lighter weight, less moisture retaining. They'll do a good job for you and hold all that weight so that your RV can be stable while you're parked. So that's gonna complete our look for today. Again, I'm Michael with Thanks for watching..

Info for this part was:

Employee Chris R
Video Edited:
Chris R
Employee Michael B
Installed by:
Michael B
Employee Adam E
Installed by:
Adam E

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.