bing tracking image

Review of SuperSprings Trailer Leaf Spring Suspension - Springs - TSS-106-40

content loading

Customers compare TSS-106-40 to these similar products




Products Featured in this Video



SuperSprings Trailer Leaf Spring Suspension - Springs - TSS-106-40 Review


Today we're gonna take a look at the Sumo Springs trailer helper springs for 3000 pound to 8000 pound single underslung axles. Now this kit will improve the suspension, handling, and safety of your trailer. They use progressive rate springs, provides additional support as needed so you always have a nice smooth, comfortable ride and it'll allow the leaf spring ample movement while cushioning any light load.This spring will become more rigid as more weight is added, increases the stability, provides great performance while hauling heavy loads, and it raises your trailer ride height. These will work independently side to side, help compensate for any off center loads. Helps reduce body roll when swerving and turning corners and it works to eliminate trailer sway. These do also act as shock absorbers, taking the brunt of bumps on rough roads, helps reduce the load on leaf spring assembly, and will extend the life of your trailer's suspension.The spring is made of a patented micro-cellular urethane construction.

Again, the application for this is 3000 pound to 8000 pound single underslung axles. Now an underslung axle will be where the leaf springs will sit under the axle. Now if you want to use this on a tandem axle it does require two kits and these are designed to work with a suspension system that is in good working order.Now this kit will include everything laid out here on the table, the two jug 00:01:17 style springs, the mounting brackets and the hardware, the spacers, nice set of detailed instructions on how to install everything, and right over here they do have a line relocation bracket that's included. It is a very simple installation to install this. Now on some travel trailers there may be a gas or utility line that's mounted to the lower portion of the frame and that's why it includes this relocation bracket because you might have to slightly relocate it to avoid interference with these sumo springs.This is a maintenance free installation, there's no tubing to run or air pressure to monitor like with air springs.

Weight capacity on this is 500 pounds at 50% compression. You do want to make sure not to exceed your trailers weight carrying capacity. Few dimensions on the spring. Overall height of the spring is right at four inches. Diameter is three and 3/8 inches.

Now these springs do compress up to about 80% of the original height with full memory rebound and these parts are made in the USA.That should do it for the review on the Sumo Springs trailer helper springs for 3000 pound to 8000 pound single underslung axles.


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.