bing tracking image

SuperSprings Vehicle Suspension - Rear Axle Suspension Enhancement - SSR-610-47 Review

content loading

Customers compare SSR-610-47 to these similar products




Products Featured in this Video



Review of SuperSprings Vehicle Suspension SSR-610-47


Today we're going to take a look at the Sumo Springs Solo Custom Helper Springs by Super Springs. These are for the rear axle and they have a 1,500 pound weight capacity. This is a custom fit part. It is designed to fit the 2000 and newer Toyota Tundras and the 2005 and newer Toyota Tacomas. On any custom fit part what I always like to recommend is to go to our website and use our fit guide. Put in your year and model vehicle and it will show if this will work for your application.

These helper springs will upgrade your vehicle's rear suspension for improved driver control and comfort. They keep your vehicle level when you are towing or hauling a heavy load and it will help absorb bumps and shocks and help minimize sway. They do use a progressive load control. Basically these springs will compress according to the weight of your cargo. A lighter load, the springs will compress easily at first for a soft engagement and less bumpy ride. If there's more load, a heavier load, the springs will compress by as much as 80% for support.

These springs are designed to work independently from each other to compensate for off center loads, reduce body roll during sharp turns. They are made of a durable, high density micro-cellular urethane. They are designed to work in temperatures from negative 25 degree Fahrenheit up to 200 degrees Fahrenheit. The material is designed to resist damage which can be caused by oils, ropes, salts and UV rays. It does have minimal lateral expansion.

The springs compress vertically instead of to the side so they aren't easily damaged when operating tight spaces. They are maintenance free. There's no tubing to run or pressure mount like on air springs. It is a simple no-drill installation. They basically replace the factory bump stocks. This does come with a nice set of detailed instructions.

They'll tell you how to install it and this one even includes a nice tube of lock-tite to install on the nuts and bolts for the installer. The 2 john style springs are included. These are made in the USA. A few specs, the weight capacity is at 50% compression, that's 1,500 pounds. These are designed to work with a suspension system that's in good working order. These Sumo Springs will not increase your vehicle's weight carrying capacity so you need to remember do not exceed the manufacturer's weight limit of your vehicle. That should do it for the review on the Sumo Springs Solo Custom Helper Springs by Super Springs for the rear axle with a 1,500 pound weight capacity.


Questions and Comments about this Video

Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Jeff D
Installed by:
Jeff D
Employee Robert C
Installed by:
Robert C
Employee Joshua S
Video Edited:
Joshua S
Employee Dustin K
Video Edited:
Dustin K
Employee Shane H
Test Fit:
Shane H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.