bing tracking image

Review of TecNiq Trailer Lights - Recessed Mount Mini Red LED Side Marker Trailer Light - TN96MR

content loading

Customers compare TN96MR to these similar products




Products Featured in this Video



TecNiq Trailer Lights - Recessed Mount Mini Red LED Side Marker Trailer Light - TN96MR Review


Hi everybody. Andy here with etrailer.com. And today, we're gonna take a look at this recessed mount, mini red LED, side marker, boat trailer light. This waterproof, mini LED red light functions as a side marker and clearance light for your trailer when properly mounted. And as you can see, I already have it connected to 12 volt power to give you an idea just how bright this is. This is, of course, with my studio lights on.

Let me turn my studio lights off just to kind of give you a better idea of its brightness. And you can see the red light that it casts. And again, just a really bright light. This is a single, premium LED. And it's energy efficient, long-lasting.

It's gonna be vibration resistant. It's rated up to 100,000 hours of operation. And this is also a PC rated light, which means that it can produce a 90 degree angle of light to either of its central line for a total of 180 degrees of coverage as you can see here. This beam pattern can be clearly seen when you're standing directly in front of the light, as well as when you are standing off to the side on either side of this light. Now, this is a durable, UV resistant, red lens cover.

This is from a distance, but unfortunately, my camera doesn't focus real well from a distance. This is a durable, UV resistant, red lens over a red LED, and a sealed waterproof housing and lens unit. The waterproof construction of this light is going to make it ideal for use on trailers that may be submerged like a boat trailer. And the circuit board is of a military grade construction. And the urethane potting offers better protection than the common epoxy potting.

Now, this is again, a recessed mount installation with the included grommet. It requires a 3/4 of an inch diameter cut-out. And you can add a stainless steel trim ring, which is sold separately, for a finished look. This hardwires to your application with this 7 1/2 inch long pigtail. This is compatible with 12 volt DC systems and this meets or exceeds FMVSS 108 standards. The dimension is sitting right at an inch in diameter. Let me line that up here a little bit better for you. So, as you can see, about an inch in diameter. And the overall thickness, we're sitting right at about 7/8 of an inch thick. The input voltage is gonna be nine volts to 14 volts. And the power draw is gonna be 0.06 to 0.08 amps. And the wire length, again, is sitting right at about 7 1/2 inches long. And this has a 68 IP rating. And it also has a limited lifetime warranty. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..


Info for this part was:

Employee Andy C
Installed by:
Andy C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.