bing tracking image

Review of Tekonsha Tekonsha - Brake Controller Wiring Harness - 3073-P

content loading

Customers compare 3073-P to these similar products




Products Featured in this Video



Tekonsha Tekonsha - Brake Controller Wiring Harness - 3073-P Review


Today, we're going to take a look at the Tekonsha custom wiring adapter for the trailer brake controllers on the Jeep vehicles.Now this is a custom fit part. It will fit the 2018 Jeep JL Wrangler and JL Wrangler Unlimited, the 2019 and newer Jeep Wrangler and Wrangler Unlimited and the 2020 Jeep Gladiator vehicles. And on a custom fit part like this I always like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle and it'll show you if this'll work for your application.Now this plug in wiring adapter allows for a quick simple installation of your electric trailer brake controller to your vehicle. There is no cutting or splicing required. All you have to do is take this custom four pin connector end here, this will plug in to the built in four pin connector that's on your vehicle. And that four pin connector on the vehicle, it's in the vehicle's built in brake control wiring harness.

And that harness is usually located underneath the dash to the left of the steering column, and it's usually taped to another harness near the emergency brake pedal. The other end here will plug in to the back of the electric brake controller itself.Now it does come with a nice set of detailed instructions that'll describe how to hook it up and where that connector is. Now this adapter is compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite and Tekonsha. But the brake controller must have the built in plug for this adapter to connect. It will not work with the brake controllers that just have the pigtail wires coming out the back.

This is about 28 inches long.One note is to illuminate your vehicle trailer brake lights when you reactivate the manual override on your brake controller, which is required for use in the State of California. You can use this adapter in conjunction with the Tekonsha brake controller converter and seven way adapter, part number 30235-P, which we do sell separately on our website.But that should do it for the review on the Tekonsha custom wiring adapter for the trailer brake controllers on the Jeep vehicles.


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video by:
Chris R
Employee Conner L
Test Fit:
Conner L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.