Comprehensive Review: Timbren Suspension Enhancement System-TFR350SDJ Video

There are two Timbren systems for your 2023 Ford F-350, like you said, with the best definitely being the following part number: - Timbren Suspension Enhancement System #TFR350SDJ The reason for that is the #TFR350SDJ is designed for standard pickups…

Hey Paul; the answer to your question depends on what you want to do exactly. It also depends on what your trailer already has on it. I'm going to assume the 2016 Jayco Pinnacle you put in our fitguide is the trailer you have. I'm also going…

Yes, it does. The Spacer Kit for Timbren Suspension item #T68MR will work with the Severe Service Timbren Suspension Enhancement System item #TFRTT350J. This system is confirmed to fit the 2023 Ford F-250. It already includes a pair of 1"…

The fuse for the Go Power PWM Solar Charge Controller #GP76QR is not located on the controller itself. It should be inline on the wire running from the controllers positive port to the battery.

The Timbren #TFRTT350J is a fit for your 2022 Ford F350 4x4, but its 8600 lb capacity would be overkill for your application, in my opinion. You'd have a pretty rough ride with the suspension under load. I believe you'd be happier with the…

Hey Scott, yes the Timbren kit part #TFR350SDJ that you referenced can be used on your 2017 Ford F-350 with a 4 inch lift kit but you'll need to also use the spacers part #A25723-90AH00. You'll need a total of 8 of the spacers plus you'll…

To get the gap close enough between the axle and the Timbren kit you installed you would want to install the spacers like you mentioned. For that we have the 1 inch spacer part #A25723-90AH00 and the 1/2 inch spacer #TA25723-90AD00. To pick out the…

First of all, thank you for your service. Unfortunately at this time we don't offer a military discount, but we do have free shipping most of the time on orders like this one. To confirm your fit, we have two sets of jounce springs available from…

From the top of the bracket to the bottom of the rubber spring the #TFR350SDJ Timbrens measure about 7-1/2 inches. When installed you ideally want about a 1/2 inch to an inch of space between the Timbren and its contact point. However, to install…

The dimensions of the Timbren kit part #TFR350SDJ you referenced are 8-1/2 inches wide by 10-1/2 inches tall by 6 inch diameter. This is a confirmed fit for your 2017 Ford F-350 FX4 and does not require you to use any type of spacers.

For your 2021 Ford F-350 Super Duty I recommend the Timbren Suspension Enhancement System - Rear Axle #TFR350SDJ. These have an 8,600 lb capacity and help with vehicle sag while increasing stability. The springs work independently so they help…

It is possible you can use the Timbren Suspension Enhancement System #TFR350SDJ (which is made for a Ford F-350) on your 2020 Ford F-250, but we have never done this and it hasn't been tested so I just can't guarantee a good fit. There are…