All About the Timbren Rear Suspension Enhancement System Video

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The Timbren rear jounce spring kit you referenced, part #TGMRYS4, is a confirmed fit for the vehicle you indicated, a 2010 Chevy Tahoe, as well as several other GM vehicles noted on that item's page. Thank you for your photo that shows the…

I was able to check your owner's manual and depending on whether you have a 2 wheel drive or 4 wheel drive model you will be able to tow the 5,800lb camper just fine. If you have a 2WD you will have a maximum trailer weight of 7,800lbs and for…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I spoke with my contact over at Timbren about helper springs #TGMRYS4. The overall height of the whole assembly is 4-3/4 inches. The spring by itself is 3-3/4 inches. You'll want an inch to an inch and a half of space between the frame/axle and…

Is it the additional spacers that are causing the main part of the spring to out of alignment compared to the stock bump stops on your 2004 GMC Yukon XL? Are the Timbren springs fully seated in the bump stop cups? On these vehicles it is hard to…

I spoke with my contact at Super Springs and the SumoSprings Custom Helper Springs, #SSR-204-40, will fit on your 2003 GMC Yukon XL with coil springs as long as it is a 1500 model. These springs are designed to replace your factory bump stops. Once…

I do have an option for you but the Air Lift 1000 Air Helper Springs for Coil Springs won't work on a 2016 GMC Yukon XL with MagneRide. That said, we do have a compatible option for you in the Timbren Rear Suspension Enhancement System part…

To add a set a Timbrens to your 2022 Ford F-150 Tremor you will need the Timbren Rear Suspension Enhancement System item #TFR1504E. This system has a 6,000 lbs capacity and will help support your stock suspension system when towing. Since your Tremor…

I recommend using the Fastway e2 Weight Distribution #FA92-00-0800 for your 7x14 Interstate Loadrunner tandem axle trailer. This hitch is rated for trailers up to 8,000lbs with a tongue weight between 400-800lbs. If your unloaded tongue weight is…

While the spacers included in the Kit #T68MR will work with your Timbren Springs #TGMRYS4 they do not use the same mounting bolts. Your GMC Yukon uses 3/8" hardware while the spacer kit includes M10 hardware so you would still need to source the…

For your 2004 Chevy Suburban, the Timbren Rear Suspension Enhancement System for 4x4 #TGMRG25C will give you load stability and support to help reduce sag. It also will help reduce body roll and will assist your vehicle suspension with absorbing…