bing tracking image

Titan Brake Actuator T2374600 Review

content loading

Customers compare T2374600 to these similar products




Products Featured in this Video



Review of Titan Accessories and Parts T2374600


Today we're going to take a look at the Titan replacement master cylinder assembly for Titan Model 10 and Model 20 brake actuators for drum brakes. This replacement assembly is designed to work with the Titan Model 10, Model 20 actuators with the drum brakes only. It will also fit the Dyco Model 10 and Model 20 brake actuators. It includes everything shown here. All assembled. A master cylinder itself.

Right here, the orifice connector that will connect to your hydraulic brake lines. The bracket assemblies. Right hand and left hand, bracket assembly. The hex bolts. These are three eighths diameter hex bolts with the hex nut and the lock washer.

It also come with the plastic master cylinder cap that you just unscrew. That's where you put your brake fluid into the cylinder. On the top of the cap it does say, use only DOT Type 3 brake fluid. One last thing I want to give you is the measurement on the mounting bracket. The holes, center to center.

If we put a ruler on it, you can see it's going to be right at four and three quarter inches. That should do it for the review of the Titan replacement master cylinder assembly for Titan Model 10 and Model 20 brake actuators for drum brakes.


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video by:
Jonathan Y
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.