bing tracking image

Titan Brake Actuator T4835800183 Review

content loading

Customers compare T4835800183 to these similar products




Products Featured in this Video



Review of Titan Accessories and Parts T4835800183


Today we're going to take a look at the Titan zinc-plated solenoid shield for the Titan model 60 trailer-brake actuators. This is a nice corrosion-resistant cover that'll bolt on to the rear of your Titan model 60 actuator, to protect the electric reverse lockout valve. The zinc plating will help resist corrosion. Just to show you where this will attach, I happened to pull a Titan model 60 actuator. You can see this one already has the solenoid valve attached to it. Basically you can see it ...

now this one I've added to it, it didn't come with the solenoid vale, but I just added it. You want to protect it so nobody steps on it or breaks it. All you have to do is remove the 2 screws right here, and then remove this cover that comes on the actuator. Then this solenoid shield, basically what you will do is you will need to remove the 2 screws up on the top here. Just bolt those 2 on there, then you just bend it down till those 2 screws line up. Once you have that, that'll give you protection of the solenoid valve so it doesn't get damaged.

It's well worth adding this onto if you have a solenoid valve at the back of your actuator. That should do it for the review on the Titan zinc-plated solenoid shield for the Titan model 60 brake actuators.


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.