bing tracking image

Titan Brake Actuator - Surge Brake Actuator - T4749600 Review

content loading

Customers compare T4749600 to these similar products




Products Featured in this Video



Review of Titan Brake Actuator T4749600


Speaker 1: Today we're going to take a look at the Titan Weld On Hydraulic Disc Brake Actuator with the two and 5/16 ball coupler and a 12,500 pound weight capacity. Now this hydraulic actuator will activate your trailer brakes when your tow vehicle tows or stops. Basically what happens is when you apply the brakes in your tow vehicle, deceleration occurs and the momentum will push your trailer toward the rear of your vehicle.With a surge brake system, the actuator is triggered, as your trailer moves forward, once your tow vehicle starts to slow down, and when this happens, the actuator will contract which applies force to the master cylinder right here in the back and this in turn, supplies the necessary hydraulic pressure to engage your trailer brakes.This one is a unique roller design, it has a roller right up here, reduces resistance during the telescoping to create straight line movement. It has a greased circ 00:00:48 fitting on the roller, makes for easy lubrication. This is a sturdy, durable steel construction, it does resist bending in jackknife situations.The ball coupler right up here has a nice trigger latch on it which allows for safe and easy coupling and uncoupling. It has a nice circle grip, makes the latch very simple to use.

Just pull back on the trigger to open the bolt socket. Once it's open, drop it onto the hitch ball. Once it's on there just rotate it back and that circle grip here will lock into place and lock it onto the ball.It does have a nice corrosion resistant prime finish on it. It does include the breakaway kit, you can see the chain that's attached to the breakaway lever. This gets attached to your tow vehicle so in case of a runaway trailer, it'll pull on this chain which will activate the breakaway system, keep the trailer from running away.Now this actuator is a weld on installation.

It is designed to weld on to a straight three inch wide trailer tongue.The application, again, for this is trailers with disc brakes. The ball size it fits on is two and 5/16 diameter. Gross towing weight capacity, again, is 12,500 pounds and the maximum tongue weight is 1,250 pounds.That should do it for the review on the Titan Weld On Hydraulic Disc Brake Actuator with the two and 5/16 ball coupler and a 12,500 weight capacity.


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Dustin K
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.