Dexter Coupler: The Breakdown Video

Axles that are 3,500 lbs are all 2-3/8 inches in diameter, and that is the diameter of the 3,500 lb Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs #35545I-ST-89.

I'd recommend going with the #EM34423 instead as it's closer to the length you need as it is 5-1/2 feet long and it has a higher capacity at 1,333 lbs working load limit and 4,000 lbs break strength. The ratchet portion could easily be…

So what you have currently is our part #435800 which we have a replacement LED style light for with the part #M826R-7. For an install grommet you'll then want the part #426-18 and for a wiring harness part #431-491 and you'd be set.

We do have a solution for you. You could get this coupler #T2343400 if you have a 3 inch wide trailer tongue, as it is compatible for a 50mm ball so it will work with your BMW set up!

To help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of movement…

I did some research online and I found a coupler with some lower mounting holes that looks similar to the Ram's. It is the Titan Coupler - Painted - Multi-Fit Ball - 3" Channel - Bolt On - 5,000 lbs item #T2343400. I have attached a diagram…

Yes, you can remove your weld-on coupler and install a new bolt-on coupler that fits a 2 inch ball. There is just a few things you need to do to before and when installing. You need to know what channel size and the weight capacity you will need for…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

No, it is not safe to use a 1-7/8 inch ball with a trailer that has a 2 inch ball coupler. Most couplers have an adjustment for the latching mechanism that may solve your issue. If you are hooking and unhooking on a surface that is not level,…

The only 50 mm hitch ball we offer is the part #63912 with a 3/4 inch diameter shank that would only fit 1-1/4 inch ball mounts, but a 2 inch hitch ball translates to 50.8 mm. Which is very close. Since you have a 2 inch hitch your best option would…

I'm sorry to hear about the damage that occurred to your trailer, but it is not safe to change out the size of the hitch ball to accommodate a damaged coupler, which, from your description, is what it sounds like you have. That is especially true…

Your UFP surge actuator 34043 is a model A-60 actuator. This is designed for a 2" hitch ball and trailer weighing up to 7,500lbs. I have made a list of different bolt on couplers we carry below you can choose from to bolt in place of the…