Feature Breakdown: TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear Video

Hey Neils, thank you for all of the measurements it really does help! So the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7834 you were looking at is not going to work, but the TorkLift GlowStep Stow N' Go Scissor Steps w/…

Not following the manufacturer's instructions to the letter will give them an excuse if something were to happen so while I can't recommend drilling the extra holes to ensure it's safely mounted, it's the only way that the steps will…

Yes, the Voyager WiSight 2.0 Wireless RV Backup Camera System #ASA84YR would be an excellent option for a Mandalay Motorhome. The Voyager WiSigh is wireless which means there will be no wires running from the monitor to the camera. The monitor simply…

In regards to the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7833, there is indeed a 6-1/2" gap between the first/last step and the mounting plate. This is needed in order for the steps to fully retract. It is not the intention of…

Great questions. I have solutions for both questions. Lippert does not sell replacement bolts or hardware kits for this application you will be able to source the bolts you need from any local hardware store. As for a replacement options I strongly…

While we do not have a video of these steps being specifically installed on your camper I took a look at the instruction manual, which is also linked, and there is a method for installing these steps on a camper that does not have a bumper. You would…

Since the TorkLift GlowStep Camper Scissor Steps #TLA7803 and TorkLift GlowStep Camper Scissor Steps w/ Landing Gear #TLA7803-8000 you were looking at are designed to be mounted with 6 lag bolts to hold the steps to your bumper, I recommend…

There is some adjustability for the steps. For example, the 3-step TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7833 you're looking at is designed for an entry height of 23-1/2" - 34-1/2" but for a 4-Step Version,…

I am not personally a huge fan of the TorkLift StableLoad Suspension Upgrades part #TLA7310 and #TLA7202 as you have come to find out they don't always provide the most support but I am a big fan of the Timbren Rear Suspension Enhancement System…

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375 lbs - Black Bracket #TLA7833 has a weight capacity of 375 lbs. The mounting bracket is 21.5 inches wide by 12.5 inches tall and 8.5 inches deep. It is designed for…

Hey Rad, it comes down to what the door threshold height is of your camper which Torklift Glowstep would be correct for you. If the entry height is between 25-1/2 inches and 36 the part #TLA8103 would be correct. Here are the other height ranges if…