bing tracking image

Tow Ready Pintle Hitch - Pintle Hook - Standard - 63015 Review

content loading

Customers compare 63015 to these similar products

Products Featured in this Video

Review of Tow Ready Ball Mounts 63015

Today we'll be reviewing part number 63015, this is the pintle hook from Tow Ready. It's going to have a gross towing weight of 30,000 pounds with a maximum tongue weight of 6,000 pounds. This pintle hook can be bolted to a pintle hitch mount or directly to a reinforced utility truck bumper. All the mounting hardware that you need is included. It is made from a steel construction with a powder coat finish so it's going to stand up really well against rust and corrosion. If we take a look at the mounting holes here on the back side, each hole is going to offer a diameter of 17/32nds of an inch. Center on center measuring across is going to measure 3 3/8ths.

Center on center measuring up and down is going to measure 1 3/4 of an inch. Very easy system to operate. In order to open up the hook all you got to do is release the pin, lift up on the T-handle and then pull it back. That's going to open it up, that way you can fit the Lunette ring in. If we measure the distance right here, the gap, it's going to give us the measurement of 1 3/4 of an inch. The safety pin and clip is attached with a chain, that way you don't have to worry about losing it you can always keep it close at hand. It's also a really easy system to bolt on to the pintle hitch mount so for our demonstration today we'll using a pintle hitch mount just to show you how simple that is.

A lot of times they have numerous mounting locations so once you have the mount holes picked out that you want to use, all you need to do is install the bolt. For our demonstration I'm just going to install the top two. Then you would need to install the lock washer and the nut. Once you have all four bolts through and all the hardware tight and secure you'll be ready to make your connection and get out on the road. That's going to do it for today's review of part number 63015. This is the pintle hook from Tow ready rated at 30,000 pounds. .

Info for this part was:

Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.