bing tracking image

Tow Ready Pintle Hitch - Pintle Mounting Plate - 63058 Review

content loading

Customers compare 63058 to these similar products




Products Featured in this Video



Review of Tow Ready Ball Mounts 63058


Today were going to take a look at this Tow Ready Pintle Hook Mount part number 63058. This is a pretty hefty piece of work weighing in at 24 lbs and it features a solid shank. This pintle hook mount slides into a 2-inch trailer hitch to provide a mounting location for pintle hook. It has a gross towing weight capacity of 8000 lbs and a tongue weight capacity of 800 lbs. the shank length from the center of the hitch pin hole here to the front of the mounting plate is 11-3/4 of an inch and from the center of the hitch pin hole here to the end of the shank, the end that goes into the trailer hitch receiver, is 3-1/4 inches. Looking at the plate measurements we have a plate that is 12-1/2 inches tall by 5 inches wide.

The whole spacing from center to center horizontal is 3-3/8 of an inch and center to center vertical is 1-3/4 of an inch. There are seven sets of holes on this plate with a hole diameter of 17/32 of an inch. This would fit into your 2-inch trailer hitch receiver and you would clip this off using a pinning clip. This is not included with the item, however, you can purchase these right here at etrailer.com part number PC3. You just put the pin in there clip that off and then youre all set.

If you wanted some further security, we also carry a number of hitch lock here at etrailer.com as well. That should do it for the Tow Ready Pintle Hook Mount part number 63058.


Info for this part was:

Employee Brandon M
Installed by:
Brandon M
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.