bing tracking image

Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 118581 Review

content loading

Products Featured in this Video



Review of Tow Ready Custom Fit Vehicle Wiring 118581


Today, we're reviewing Tow Ready, part number 118581. This is a T1 vehicle wiring harness with the four-pole flat trailer connector. Its made for your Subaru Impreza. This is the four-pole flat, and it does come with a dust cover. To find out whether this will work with your Impreza, check the chart at the bottom of the product page. It will list the type of Impreza and model year that this will work with.The first thing you want to do is install your T connectors.

You have two of them. There you go. This one is the passenger side, and it has a green wire. The green wire if your stop and turn. This one is your driver side.

It has a yellow wire which is your stop and turn on that side. These are installed behind the taillights.Once those are installed, you want to match your module light somewhere between them to a flat surface. You have a flat back on the module light and this comes with double-sided sticky tape for mounting. Next, you want to install your ground, which is the white wire with the ring eyelet and it does come with a self-tapping screw. This has to be installed on a clean, smooth metal surface in order for the ground to work.Once that all is done, you take the red wire from the module light and you attach it to one end of the included black wire like that.

A butt connector comes with the kit so you can do that. Run this wire, the long black wire under your car. You can attach it to the frame using these included cable ties so that it doesn't drag. Once you get it run up to the front of your car, youre going to attach it to your battery.The way you do that is you take the included inline fuse holder, and you cut it right there so that you have one wire here and one wire here. One of these open wires gets attached to the other end of the black wire and a butt connector is included for that.

The other end of the inline fuse holder is going to be attached to this ring terminal. Then the ring terminal gets attached to your battery.The fuse older has a cover, comes with the fuse, so you all set there. This has everything you need to install the kit. It has a one-year limited warranty. There you have it for part number 118581 from Tow Ready, the T1 vehicle wiring harness with a four pull flat trailer connector for your Subaru Impreza.


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Leah B
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.