bing tracking image

TruRyde Trailer Suspension TRSS175 Review

content loading

Customers compare TRSS175 to these similar products




Products Featured in this Video



Review of TruRyde Accessories and Parts TRSS175


Today we're going to be taking a look at a spring seat for typical 2,000 pound, round trailer axles, with a 1-3/4 inch diameter. The spring seat is a necessary component of your trailer's suspension system. When mounted with a 1-3/4 inch wide leaf spring, it adds extra support and provides proper positioning for the axle. This unit's made from a durable steel construction. It welds on to a round 1-3/4 inch diameter axle, which is a typical 2,000 axle. It sits on top of a 1-3/4 inch wide spring. The cut out on the flat side of the seat surrounds the raised knob on the leaf spring to prevent turning or shifting.

It's going to provide extra support and secure positioning for the trailer axle. Please note that two spring seats are required for each axle. A few measurements to go over with you real quick. Start with the overall length, measuring edge to edge. It's going to measure about 2-1/4 of an inch long. Overall width, measures about 1-7/8 of an inch.

The height, is just shy of 1 inch, about 15/16 of an inch tall. Then this opening, right here, the rounded point, at the widest spot, that's going to give us an opening measurement of really close to an 1-1/2, maybe 1-7/16 of an inch, right in that area. That's going to do it for today's look at the spring seat for typical 2,000 pound, round trailer axles, with a 1-3/4 inch diameter.


Questions and Comments about this Video

Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.