What to Know About the Zinc Shackle Bolt with Locknut for Double-Eye Springs Video

Hello Branden. In order to help find the right replacement parts I would need more information about the axle. Unfortunately, I do not have a database that provides me with the information that is needed to find the correct parts. The axle should…

Hey Thomas, the most important factors for picking out a replacement leaf spring for a trailer are matching axle capacity and length. Getting the same amount of leaves in the spring pack is actually not a huge priority so I wouldn't worry too…

The best and safest way to have the axles orientated to the leaf spring is the way the trailer was originally manufactured. The trailer manufacturer will have tested the trailer with the original suspension setup for adequate braking and handling…

I never recommend using grease with Nylon Bushings #TRBU11566. The grease can trap dirt which will cause the nylon to become damaged easier. And the chemicals in different greases can cause the nylon bushings to break down. If you want to use Grease…

The 2x2 inch square axle is likely 3,500 lbs or less capacity. I would need more spindle dimensions or bearing numbers to assist. If you pull a hub and measure at the spindle where the bearings and seal ride using the digital caliper like #PTW80157 I…

Your current hubs are correct for fitting the spindles of the trailer axle #T20BTR-EZ-7258 that you are interested in. The correct EZ lube dust cover would then be the #RG04-040 and you'd be set!

The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles #T20BTR-EZ-7258 that you referenced has a BTR spindle on it that takes a hub with an inner and outer bearing of L44649. For an idler hub you would want the part #8-258-5UC1-EZ. Or if you want a…

For trailer axle #20545I-EZ-72-15 the axle itself is rated for 2,200 pounds. The axle alone is #T20BTR-EZ-7258. The hubs that are included with #20545I-EZ-72-15 are rated for 2,000 pound axles so since they are lower than the axle itself the rating…

The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles #T20BTR-EZ-7258 that you referenced has a BTR spindle on it that takes a hub with an inner and outer bearing of L44649. This would not work with your hubs because they have inner bearing of…

We have exactly what you are looking for with the 3-Leaf Double-Eye Spring for 3,300-lb Trailer Axles #SP-072275. It measures 18-5/16" from center eye to center eye, has a 1-3/4" width. and uses 9/16" bolts. Just be sure that the…

The closest trailer axle we offer for what you're looking for is the CE Smith Trailer Axle Beam part #CE33201GA which measures 57-1/2" long at the hub face and 46-1/2" long at the spring center. If the spring center does not match, they…

Based on your wheel size and tire diameter the tire size you have now would be the 4.80-8 which the biggest replacement for that would be the 5.70-8 like the #AM10012 which is 2 inches taller.