etrailer Trailer Suspension - Leaf Spring Suspension - 28-5 Review
Products Featured in this Video
Review of TruRyde Trailer Suspension 28-5
Today we're going to be taking a look at the front, center, or rear hanger for double eye springs. This hanger can be used as a front hanger on single axle applications and it can be used as a front, center, or rear hanger on tandem or triple axle applications. It's designed to fit 1 3/4 inch wide double eye springs with 9/16 inch diameter eyes. It will work with a 9/16 inch diameter bolt. Your hardware is sold separately. The units made from a sturdy steel construction that measures around 3/16 of an inch thick. It is a weld on application so it would get welded directly to the trailer frame. The holes on the top are not for a bolt on installation.
These holes are for if the installer would like to use button welds instead of or in addition to welding around the hanger. The height measurement for a hanger is taken from the center of the mount hole to the top of the hanger so for this particular unit it's going to give us a height measurement of 3 1/4 inches. The overall length of the unit edge to edge going this direction we're looking at a measurement of 3 inches. The overall height, that's going to give us a height of around 3 13/16 of an inch. When it comes to the width, measuring the external width first, that's going to measure about 2 3/8, internal width is going to measure about 1 7/8 - 1 15/16 of an inch. Then all the holes on the unit are going to have a diameter of 9/16 of an inch. That's going to do it for today's look at the front, center, or rear hanger for double eye springs..
Info for this part was:
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.