bing tracking image

Ultra-Fab Products RV and Camper Hitch - Frame Mount Hitch - UF35-946403 Review

content loading

Customers compare UF35-946403 to these similar products

Products Featured in this Video

Review of Ultra-Fab Products RV and Camper Hitch UF35-946403

Speaker 1: Today we're taking a look at the Ultra Fab 2" Trailer Hitch Receiver for trailer frames. This unit provides a 2" by 2" trailer hitch receiver opening at the rear of your trailer or RV. This is perfect for mounting the bike rack, cargo carrier or other hitch accessory. Please keep in mind that this is not to be used for towing applications.It welds onto I-beam, C-channel or rectangular trailer frames. Also keep in mind that a gusset may be required to weld onto I-beam frames. And a plate may be required to weld onto a C-channel frame.

Its constructed of heavy-duty, powder coated steel. Does a great job at resisting rust and corrosion. Features a 3500-lb weight load capacity and a 350-lb maximum tongue weight capacity. You always wanna be careful not to exceed the RV frame rating provided by the manufacturer. And one of the neat features about this unit is that it's adjustable.So it has these arms right here that can slide out.

It's able to adjust anywhere from 47-1/8" all the way out to 77". And it is a weld on installation. So these arms extend out. Really nice design. Same construction and same finishing as the main hitch.

And then it comes with some hardware here, and those are set bolts. So on the back side, once you have the arms extended where they need to be, you thread in the bolt here to kinda lock that arm into position. And again, it's a weld on installation designed to be welded onto the RV or trailer frame.Again, adjustable from 47-1/8" to 77". Right here you have a 2" by 2" opening. This will accept a standard 5/8" diameter hitch pin or hitch lock.

And then you have safety chain loops right here that provide a suitable point for securing any accessory that you might have if it has an accessory strap or a tie down strap or a cable or chain. That's what these are used for. Overall really nice design. And that's gonna do it for today's look at the Ultra Fab 2" Trailer Hitch Receiver for trailer frames.

Info for this part was:

Employee Cole B
Installed by:
Cole B
Employee Zach D
Video Edited:
Zach D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.