bing tracking image

Review of Valterra Camper Jacks - Stabilizer Jack - 020106

content loading

Customers compare 020106 to these similar products

Products Featured in this Video

Valterra Camper Jacks - Stabilizer Jack - 020106 Review

Hello everybody, this is Jeff at Today, we're gonna take a look at this Valterra folding aluminum manual stabilizer for trailers and RV's. Now, this stabilizer here will help reduce boucing and swaying in your parked RV or trailer. It is designed to work great on fifth wheels, class-C motor homes, toy haulers, travel trailers, and even utility trailers without the auto levelers. The best locations for these stabilizers to be installed are under the rear bumper or frame, or on the side behind the RV entrance door. They're gonna pop up an insert, just to show you, there's an example of a picture of this stabilizer installed on a RV.

It is a very quick and easy setup, requires no tools. All you have to do is unfold these legs, unfold the legs out, adjust them for the height with the push of a button. Just push the button here and you could adjust the legs in or out to whatever height you need. And then you'll take this strap, hook the strap to each foot down at the bottom here, and then when you tighten the strap, it'll pull the legs in for increased height. Or if you loosen that strap, it'll spread the legs out for less height.

The strap itself is a nice durable nylon strap, has a steel buckle, has a 1,000 lb ratchet strength to it. And what's nice about this when you're not using it, just unhook your strap on both sides here, and these legs will fold up, the feet will fold up, and you can fold it into a nice compact storage, put it into this storage bag that they include. Slide it in there, pull the drawstring to shut it. And then they have a nice strap here to carry it on your shoulder with. This is a nice lightweight aluminum construction.

Has a corrosion-resistant and a dye silver powder coat finish on it. And again, the application on this is for RV's and trailers with a 14 inch to 28 inch of clearance between the frame and the ground. The legs right here, the individual leg length on these, if we extended them, push that button, extend them all the way out, would be 27 inches. They do offer three adjustment holes for different height adjustments. The foot size that rests at the bottom here is 6"x5" and the track that's right up here at the top, total length on those is 32 inches long.

One last note I do wanna mention on this, this stabilizer is not to be used as a jack, only as a stabilizer. But that should do it for the review on the Valterra folding aluminum manual stabilizer for trailers and RV's..

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Adam E
Installed by:
Adam E
Employee Chris R
Video by:
Chris R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.