bing tracking image

Ventline RV Vents and Fans - Roof Vent - V2119-3-533 Review

content loading

Customers compare V2119-3-533 to these similar products

Products Featured in this Video

Review of Ventline Enclosed Trailer Parts V2119-3-533

Today we're going to be taking a look at part number V2119-3-533. This is the Ventline Ventadome Roof Vent with a 12 volt fan. It's also going to come with a wall switch. The additional wiring that you're going to need to run this through the wall and ceiling, or how ever you want to wire it, that is going to be sold separately. You can find that here on our website. Screws and sealer are also not included. In order to get those, you can use installation kit RVIKIT100.

That's going to include all the necessary screws and sealer that you need to get the vent installed. The roof vent's electric fan is going to provide better air circulation than non-powered models. It's going to feature a power lift, so it's going to open and close the cover, which is going to eliminate hand cranking, so that's a great feature to have. The wall remote switch is provided. It's going to allow for convenient operation. You're going to be able to control the on and off function of the fan, as well as the open and close function of the vent.

It's going to feature a translucent cover, so it's going to allow some light to come through. It's got an aerodynamic wedge shaped dome that's going to be made of a durable polypropylene construction. The roof flange is made from a galvanized steel, so that's going to resist rust and corrosion and it's got mounting slots that go around the entire perimeter. The overall dimensions, measuring outside edge to outside edge, it's a square design and that's going to measure 16 1/2 inches by 16 1/2 inches. It's also going to come with the interior trim piece, this is a garnish. It's got a nice design to it, four mounting slots.

If we take a measurement overall, again this is a square design as well, that's going to measure 16 inches by 16 inches. The mounting slots going this direction are going to be separated center on center by 15 1/4 of an inch and they're going to be separated center on center going this direction by 11 1/2 inches. The garnish leg length, which is going to be this measurement right here, that's going to give us a depth of 2 1/8 of an inch. Other garnishes are available, they are sold separately. This garnish is going to fit roofs 2 1/8 of an inch to 3 1/4 of an inch in thickness. The vent is going to feature a snap out screen, so it's going to be very easy to clean. It's got the little tabs that hold it in place, so it easily just snaps out from it's location.

It's going to give you access to clean everything as needed. It's also going to give you access to the wiring so you can make your connections and get everything wired the way that you need to. It simply just snaps back into place. You can easily and quickly remove it, as well as reinstall it any time that you need to clean it or if you need to gain access to that wiring. The fan and power lift are going to use 12 volt DC power, again, wiring is sold separately. This product is made here in the USA. The rough opening size needed to get this to fit is going to be 14 1/4 of an inch by 14 1/4 of an inch. If we measure the exact opening size, that's going to give us a measurement of about 14 inches by 14 inches, so the 14 1/4 by 14 1/4 is going to give you plenty of room to get this installed. When installed, this is going to extend above the roof in the closed position by 4 1/2 inches. When it's fully opened, that's going to extend above your roof by 10 inches. That's going to complete today's look at part number V2119-3-533. This is the Ventline Ventadome Roof Vent with a 12 volt fan. .

Questions and Comments about this Video

Info for this part was:

Employee Cole B
Installed by:
Cole B
Employee Shane H
Test Fit:
Shane H
Employee Michael B
Video by:
Michael B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.