bing tracking image

Ventline RV Vents and Fans - Roof Vent - V3092-601-00 Review

content loading

Customers compare V3092-601-00 to these similar products

Products Featured in this Video

Review of Ventline Enclosed Trailer Parts V3092-601-00

Today, we're going to be taking a look at part number V3092-601-00, this is the Ventline E-Z Lift Ventadome trailer roof vent. It's going to have the aerodynamic wedged shape dome that's going to be made from a durable polypropylene construction. The cover is translucent, so it's going to allow a little bit of light through. You're going to have the very easy to use handle that's going to let you open and close the vent very quickly. You don't have to worry about gears, it's very fast to operate. It's going to feature ten locking positions for secure travel. It's going to be on a spring loaded design, so all you have to do is pull it out and then you can rotate the handle, or move the handle to whatever position you need and then it automatically snaps back into the holds, and holds the position in the place. We'll go ahead and open it up all the way.

It's going to be in the fully open position. You can also see that it has a nice perimeter weather seal. It's going to help keep out the elements when the lid is closed and then in the fully closed position, this is what's it going to look like. We also going to have the snap out screen. It's very easy to remove and clean, as well as replace if needed. On the sides, you are going to notice that each side is going to contain two mounting tabs.

These are going to be for installation of a vent cover, that's going to be sold separately. Also, sold separately is going to be you interior trim piece, or garnish, but it does have the slot for that piece to slide into. Now this is going to feature a quarter-inch thick UV resistant mounting flanges. Numerous mounting holes go around the entire perimeter for a nice tight, secure installation. Your hardware is not included, but it's very safe to install. You don't have to worry about any sharp edges.

It's going to work well with all roofing materials and when installing this, it would also be a good idea to use some weather resistant caulk, or sealant, to create a nice, tight seal. Now this is design to fit 14-1/4" x 14-1/4" inch rough openings. If we take a measurement of the exact opening size, measuring from the outer point here to the outer point right here, that's going to give us a measurement of 14-inches. Now if we measure the overall width, or length, outer edge to outer edge, that's going to be 16-1/2. It's a square design so the measurements are going to be the same going the other direction, but we say a rough opening size of 14-1/4 of an inch because right here to right here is 14 inches and then out to the mounting holes, is going to be around 16-inches, so anywhere between that, this would fit that opening size. That 14-1/4 is just going to give you a really, really good fit. That's is going to be white in color when it comes to the dome and the flange.

This product is made right here in the U.S.A. That's going to do it for today's look at part number V3092-601-00.

Questions and Comments about this Video

Info for this part was:

Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.