bing tracking image

Ventline RV Vents and Fans - Roof Vent - V3094-603-00 Review

content loading

Customers compare V3094-603-00 to these similar products




Products Featured in this Video



Review of Ventline Enclosed Trailer Parts V3094-603-00


Today we're going to be taking a look at part number V3094-603-00. This is the vent line easy lift vent-a-dome trailer roof vent. It's going to feature a twelve volt fan; it's going to have the aerodynamic wedge-shaped dome that's going to be made from a durable polypropylene construction. The cover is translucent so it will allow some light through. Here on the bottom side, we're going to notice the very easy to use T-handle, that's going to let you open and close the lid. You don't have to worry about any gears, it's very fast to operate, and it's going to offer ten locking positions for secure travel.

That's a spring loaded design, so you lift up on the handle, and then you can adjust it as needed. As soon as you let go, it's going to release back into the hold to lock the cover into whatever position you have it set at. This is fully open, and then fully closed. You'll notice in here that we have the eight blade white fan, and we're going to have a nice perimeter weather seal that's going to keep the elements out. It's also going to feature a snap out screen, that way it's very easy to clean and to replace if needed. On each side you're going to notice that we have two mounting tabs. Those are going to be there for installation of a vent cover, a vent cover is sold separately.

It's also going to have the open area to receive the interior trim piece or garnish, that's sold separately as well. The twelve volt fan is going to have a two wire design. White's going to be for ground, black's going to be for power and it's going to have the on and off switch. This is going to be a quarter inch thick UV resistant mounting flange, it's got mounting holes that go around the entire perimeter of the vent for a nice secure installation. Your hardware is sold separately. But that's a durable plastic piece, going to be very safe to install, you don't have to worry about any sharp edges.

It's going to work well with all roofing materials and when installing, we're going to recommend- it would be a good idea to use weather resistant caulk or sealant to create a nice, tight seal for the installation. This is designed for fourteen and one quarter inch by fourteen and one quarter inch rough openings. If we take a measurement from outer edge to outer edge, that's going to give us a measurement of sixteen and one half inches. Square design, so it's going to measure the same going the other direction. We're going to have the smoke colored dome and this product is made in the USA. I want to go ahead and hook it up to our power source, that way you can just see how the fan operates and you can kind of hear how loud it is. Go ahead and hook it up and then we'll use the switch right here to turn the fan on.

So it's a pretty quiet fan, it's just got one speed. Again, that's going to be an eight blade white fan. Nice, smooth, simple operation. That's going to do it for today's look at part number V3094-603-00.


Questions and Comments about this Video

Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.