bing tracking image

Yakima Hitch Bike Racks Y8890200 Review

content loading

Customers compare Y8890200 to these similar products




Products Featured in this Video



Review of Yakima Accessories and Parts Y8890200


Speaker 1: Today we're taking a look at the replacement hitch bolt and clip for Yakima bike racks. This mounting hardware replacement kit includes a hitch bolt, a split lock washer, and a clip, which goes onto the end of the bolt. This works as a replacement for multiple Yakima bike racks, so to see if this product works for your bike rack, you can check out the racks listed on this product's product page under specs.This hitch bolt and clips secure the rack to the vehicle's hitch. You can tighten the bolt with a 15 16th inch wrench or socket. A few measurements to go over with you real quick, starting with the usable links. That's measuring from the bottom of the bolt head to the area where the clip installs.

That's gonna measure three and nine 16ths of an inch. From the bottom of the bolt head to the end of the pen there's about four and one-quarter inches. The bolt diameter is five eighths of an inch.That's going to do it for today's look at the replacement hitch bolt and clip for Yakima bike racks.


Barry S.

5/21/2019

bolt tightens into a nut and nut retainer...? Where can I get Nut holder retainer that fits inside 7/8 inch shank? Yakima rack Buckhorn

Etrailer Expert

Rachael H.

5/23/2019

If your Buckhorn had a 2 inch shank then the part you would need is # Y8820106. But if the shank of your rack has an interior dimension of 7/8 then you likely had the 1-1/4 version of the Buckhorn, and that had two generations. The older generation that was produced from 2004-2008 the replacement shank is not available. It can be identified by the bike chain straps (rubber straps that attach bike to the carrier) that have 5 holes. The newer Buckhorn, that was produced from 2008-2012, used an 8 hole chain straps, and that replacement shank that has an interior thread for the hitch pin is part # Y8890203.

Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Evangeline M
Installed by:
Evangeline M
Employee John S
Video by:
John S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.