bing tracking image

Review of Yakima - Ladder Racks - Y01161

content loading

Customers compare Y01161 to these similar products




Products Featured in this Video



Yakima - Ladder Racks - Y01161 Review


Today we're taking a look at the load stops for Yakima Crossbars. Now, these load stops integrate with the Yakima T-slot crossbars to help keep heavy loads in place. They fit the Yakima HD Crossbars, part number is Y01156, Y01157, and Y01158. It also fits the Yakima Jetstream Flush Bar, Rail Bar, and other standard T-slot crossbars.They do have the built in tie down points, so it's gonna help secure your load or secure your gear. You can place a hook in there from a tie down strap or a bungee strap. It's a simple tool free installation.

The position can be adjusted easily, simply by turning the knob. So this right here engages in the T-slot, and so does the included adapter bar. You're gonna get two different styles of adapter bar, the thick one is used for the HD crossbars, and the thinner ones are used for all the other crossbars. But once installed, to move it, all you have to do is loosen that knob up and then you can slide this around to where you need it and then re-tighten it or re-engage it simply by tightening that knob. It's got a nice, easy grip design to it, very comfortable to control and operate.The actual load stop is made from a durable steel construction with powder-coat finishing to resist rust and corrosion.

With this part number, you get four load stops. Now when it comes to the measurements, from the very front of the unit to the very back of the unit is about four and a half inches long. Side to side, it's an inch and a half wide. And the overall height including the T-slot here at the bottom attachment point to the top of the unit is six and a half inches tall. Now once installed, as it sits on your bar, it's only gonna be about six inches tall.

And then the tie down hole diameter right here, is 3/4 of an inch. Now when it comes to the weight capacity, with Yakima HD Crossbars, it's 250 pounds and then with the Jetstream Flush Bar Rail Bar, it's 165 pounds.So it comes with your actual load stops, comes with the tightening knob, comes with the necessary attachments depending on the bar you're gonna use it on, but both sets are included. It has the integrated T-slot attachment right here and it also comes with some pads which install on the bottom of the unit as well according to the included instructions. This product is also covered with a limited lifetime warranty.That's gonna do it for today's look at the load stops for Yakima Crossbars.


Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Chris R
Video Edited:
Chris R
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.