Review of the Trailer Hitch Extender for 2" Hitch Receivers Video

I do have some potential solutions for you, but we are not aware of any kind of adapter that would go from a 2" hitch to a 2-1/2" hitch. An adapter like that would cause a lot of folks to overload their 2" hitches. The 2" hitches…

Because there isn't tongue weight like you mentioned you can use a hitch extension like the #e48YR with your dual hitch adapter so that you have the needed clearance.

The Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" #RM-071-1075 has a maximum tongue weight of 400 pounds. The tongue weight is the downward force that the trailer exerts on the hitch. If you are looking for the…

The Yakima EXO Swing Away Storage System w/ Enclosed Cargo Carrier and Cargo Carrier #Y44ZR is not actually meant to be used with any type of hitch extender or adapter so with your truck having a hitch extender, it's not going to be recommended…

I'm pretty sure I understand what you're wanting to do but I don't think we have exactly what you're looking for. The closest option we have will be something like the Brophy Hitch Extender #RHSE that measures 19 inches long (which…

The longest extension available that will work with the factory trailer hitch receiver on your 2014 Dodge Ram 3500 is the Trailer Hitch Extender #e48YR. You will need to measure from the center of the hitch pin hole on your trailer hitch receiver to…

The TorkLift FastGun Turnbuckles for Frame-Mounted Camper Tie-Downs - Polished Stainless Steel - Qty 2 #TLS9526 do not come as singles. You may be interested in TorkLift Derringer Handles for Camper Tie-Down Turnbuckles - Qty 4 #TLS9528 for use with…

The Brophy Basic Turnbuckle #TB38 has a 1/4" rod and the opening is 1/2". I went out to the warehouse and found that it is compatible with the eyelet that comes with the TorkLift Derringer Handles #TLS9528 that you referenced. We currently…

I went out to the warehouse to get the measurement you are looking for on the TorkLift Derringer Handles #TLS9528. From the top of the hook opening to the base where the turnbuckle threads in is 4-7/8 inches.

If you are looking for an effective way to tie down your camper, but did not like the cumbersome way you had to re-tighten your previous turnbuckles, then the best solution for you is going to be the TorkLift AnchorGuard, #TLS9020. These are only…

To use the Torklift Turnbuckles part #TLS9522 that you have you do not also need the #TLS9000. These kits essentially do the same thing and both would not be required.

Yes, the HappiJac Qwik-Load Upgrade Kit #LC182894 will work with the TorkLift Basic SpringLoad Turnbuckles #TLS9000. The HappiJac kit fits 1/2" threaded rods like what the TorkLift kit uses.