bing tracking image

Review of etrailer Hitch Reducer Sleeves - e33YR

content loading

Customers compare e33YR to these similar products




Products Featured in this Video



etrailer Hitch Reducer Sleeves - e33YR Review


Hello, everybody. This is Jeff with etrailer.com. Today we're gonna take a look at the etrailer hitch receiver reducer sleeves. Now these adapter sleeves will let you use a two inch and two and a half inch towing and hitch mounted accessory with your three inch hitch receiver. Also, the small sleeve here can be used separately to reduce a two and a half inch by two and a half inch hitch receiver opening to a two inch by two inch for your two inch hitch accessories. It is very easy to use.

Again, basically, if you use the larger one, that'll fit into a three inch by three inch hitch, and it gives you an opening here of two and a half inches by two and a half inches. And then, again, if you take your other one, we mentioned you could use it separately, but you could also slide this in. Line up your hitchpin holes and now you're reducing from the three inch by three inch down to a two inch by two inch. So, it gives you a different combination of what you need. These are a sturdy steel construction.

If you notice, they have a nice matte black powder coat finish over a protective base coat and it's the same finish that's used on our etrailer hitches to give you superior rust resistance. Now, when you do use these, it will require a hitch pining clip or a hitch lock to secure the sleeve and accessory to your hitch. These are sold supplemental on our website. The hitchpin hole diameters on both of these is three quarters of an inch. Specs, again, the application, this will work for three inch by three inch hitch receivers and two and a half inch by two and a half inch hitch receiver openings.

The hitch receiver sizes it'll give you is two and a half inch by two and a half inch on this one and then two inch by two inch on this one. Now, the weight capacity on these sleeves will be limited to the capacity of the hitch. Overall length on both sleeves, I'll go ahead and insert it in there and they're both the same length, is gonna be right at six and three eighths inches. And then the distance from the center of the hitch pin hole to the end of the shank right there is two and a half inches. But, again, if you want to use it like this, it'll reduce a three inch hitch down to a two inch hitch.

You take out the sleeve, this will do a three inch to a two and a half inch hitch. And, if you use this separately, it'll reduce a two and a half inch to a two inch hitch. But, that should do it for the review on the etrailer hitch receiver reducer sleeves..


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Adam E
Installed by:
Adam E
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video by:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.