bing tracking image

Review of etrailer Trailer Fenders - Single Axle Jeep Style Aluminum Fender - HP96VR

content loading

Customers compare HP96VR to these similar products

Products Featured in this Video

etrailer Trailer Fenders - Single Axle Jeep Style Aluminum Fender - HP96VR Review

Jeff: Hello everybody. This is Jeff at Today we're going to take a look at this etrailer single axle Jeep-style diamond plate aluminum trailer fender for 13" to 15" wheels. It is for a quantity of one fender.Now, this fender is designed to cover one tire on your single axle trailer. It will act as a splash guard to help keep road debris from hitting other vehicles, and it helps to protect your trailer's cargo. Now, if you notice I'm going to zoom in here, if you notice on both edges on this fender, on both sides, they have a 1" curve radius lip on them to give you extra protection and a nice finished appearance, and it also allows for mounting this to either side of your trailer.

And as we mentioned, this is a nice sturdy diamond plate aluminum construction. This highly polished diamond plate finish gives you a nice non-skid surface, and a decorative look to your trailer.Does use a PVC coating on this to provide scratch resistance. And this is a classic teak design, which outfits your trailer in a nice unique style. Instead of the normal rounded fender style, this design has the flat top to it with the 70-degree angle to the sides. Now, this is a bolt-on installation with mounting brackets.

Now, the mounting brackets are not included. Those we do sell separately on our website. This part is made in the USA.Few specs on this. It's for quantity of one fender. Application, again, is a single axle trailer with 13" to 15" diameter wheels.

And the weight on this, being aluminum, is only about four pounds.And the last thing I want to do is give you some dimensions. The length, we're going to measure from this end all the way over to this end. If we do that, you're going to see it's right at about 33" long. The height on it from the very bottom to the very top is going to be right at 17" tall. And then the width on this is going to be right at 10" wide.But that should do it for the review on this etrailer single axle Jeep-style aluminum trailer fender for 13" to 15" wheels for a quantity of one..

Kenneth H.


Do you sell a full size back plate for the HP96VR? If so, what does that cost? Thanks

Etrailer Expert

Jon G.


We do not have any back plates for that trailer fender. The closest you'd get to that is the part # HP72FR which is raw steel so you would be able to cut it down to the size that you want.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.