bing tracking image

Review of etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-2K

content loading

Customers compare AKIHUB-545-2-LF-2K to these similar products




Products Featured in this Video



etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-2K Review


Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this pre-greased trailer idler hub for 2,000 pound axles. It has a five on four and a half inch bolt pattern. Now this trailer hub assembly will fit idler axles. It is a pre-greased hub, which makes it easy to install.

No need to pack bearings with grease. It'll come already pre-greased with the lithium complex multipurpose grease. It does include the pre-greased inner and outer bearings, and they use the same bearing on the inner and outer. It's part number L44649. The bearing races that the bearings ride in are all pre-installed and it also has the pre-installed grease seal on the back here in the rear.

That's a part number 10-9. It does come with the grease cap and then five of the half inch by 20 size lug nuts to install your wheel to your hub.Now, this is a sturdy iron construction. They use a zinc enriched paint on this hub to add durability. It is QAI and CSA certified. Again, the specs on this, it fits 2,000 pound trailer axles with the BTR spindles.

It is compatible with standard axles from most manufacturers including Dexter, Lippert and Al-Ko. The hub diameter, which is the diameter right here is 6.25 inches, so this will fit 13 inch to 15 inch wheels. The bolt pattern is five on four and a half inches. The wheel stud diameter is a half an inch. So again, these half inch lug nuts will go on there.

And the weight capacity on this hub is 1,000 pounds. So when this is used with one on the other side, it'll meet your 2,000 pound axle capacity. But that should do it for the review on this pre-greased trailer idler hub for 2,000 pound axles. It has the five on four and a half inch bolt pattern.


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.