Manufacturer Discussion with Trailer Valet Video

Hey Tom, thanks for reaching out. We may have a microwave option for you, but we do not have the dimensions for the Samsung MR5494W01 on file here, and I could not find them listen anywhere online. What I can tell you is the smallest…

Hey Jesse, All of the Redarc brake controllers will work but for a 2022 Ram 1500 Big Horn you'd would want the Redarc Tow-Pro Liberty Brake Controller #RED87CR. This will come with a custom- fit wire harness to plug in instead of having to…

Hi Dale, Good catch, and I checked directly with EcoHitch for you and found the EcoHitch Stealth Trailer Hitch Receiver #306-X7201 has a 4,000 lb towing capacity and 400 lb tongue weight capacity.

Hi Emily, Before buying anything you'll want to verify that both the Pilot and the trailer hitch installed on it are rated for use with a weight distribution hitch (WDH). From what I can see Honda does not recommend it because it can shift the…

Those do not Alex but I do have a comparable set that does. They are the CIPA Custom Towing Mirrors item #CM10950. They have a mirror face which is 6-3/4" tall x 4-1/2" wide to give you a better rear view so you can see more of what is…

To secure the Trailer Valet MV PRO item #TV96FR hitch ball to your trailer's coupler you will want to remove ball from the valet itself and attach it to your trailer using the coupler lock. Then you will come in with the included wrench and…

You will need a 1-1/2" wrench like part #C20001 in order to install the nut on the 2" Hitch Ball part #63845. A 1-7/8" wrench would be much too large.

Hi Mike; we do have the 92-02-0444 which is the same as the #FA98FR. This will replace the trunnion knuckle on the #FA92-00-0450.

You would have to use a dolly like the Trailer Valet 5X Swivel Jack and Trailer Mover #STC-V211 that attaches to the frame of the trailer. This is operated by the included hand crank or you can opt for the Drill Attachment #TVDA that will let you use…

The Trailer Valet XL part #TVXL25 that you referenced can handle small inclines pretty well as long as the ground is paved or concrete. If it's gravel or grass I wouldn't recommend what you are trying to do. In the demo video I attached you…

The maximum grade for the Trailer Valet Remote-Controlled Trailer Dolly part #TVRVR9 is 5 degrees of incline. If it's anymore than this you'll want to use the Trailer Valet XL Trailer Dolly with Chain Drive part #TVXL2 for 2" or part…

There is no danger of the Brophy Cable Camper Jacks #CJ31 flipping the camper over when you are using them; you just need to ensure they are properly used and aren't overloaded past their 1,000 lb (combined) capacity. These jacks have a tripod…