Titan Brake Actuator T4395100 Review Video

You are correct that the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 you were looking at is the replacement master cylinder for your older 23361. I included a video of the Titan #T4395100 for…

The DICO 189 you referenced is the older version of the Titan 60. You will want to replace the master cylinder with the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100. I've attached a video…

To replace the inner slide on the Model 20 Dexter Brake Actuator #T1521000 you need the part #T1278800. The Titan and Dexter couplers are the same thing so this will fit even though the branding is different.

I do have an option for you but the coupler on your trailer is very old and we simply don't carry parts for them anymore as they were discontinued by the manufacturer. Therefore, the only option we can offer is a new coupler, the Demco Hydraulic…

Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…

For your Titan Aero 6000 the correct replacement master cylinder is the part #T4395100 that you referenced and it comes with the piston inside of it as well.

The master cylinder assembly on the Titan model 20 actuators, like #T1521000 as an example, is bolted to the inside of the actuator. Take a look at the picture I have included as an example. There are 2 bolts on each side holding in the assembly.…

I spoke to my contact at Titan about resetting a Titan Model 60 actuator which is not the Dexter part #099-175-20. You have to remove the cover and then carefully remove the spring inside. Then set the lever in the disengaged position and re-insert…

Thanks for the pictures! To replace the master cylinder in your Dico Model 10 actuator you are going to want to use the Replacement Master Cylinder Assembly for Titan Model 10 and Model 20 Brake Actuators item #T2374600. This master cylinder is…

Shocks such as #DS12426 on brake actuators don't have a native, relaxed positioned. They will stay in place until acted upon by an outside force. You will know your shock is good if it is very difficult if not impossible to push in and pull out…

I really wish there was a cheap and easy way to lock out a Titan model 60 actuator but the only way would be with an electric lock out like the part #T4748800. This threads onto the back of your current actuator and once ran to the reverse light…

To get the Dexter Zinc-Plated, Leverlock Coupler #T4845000 in a higher weight rating you'll need to bump up to a hydraulic actuator like what we see with part #DX89FR which has a 7.5K weight rating. For an alternative standard coupler solution I…