Customers compare C79DR to these similar products
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
From the top of the Draw-Tite Max-Frame Trailer Hitch Receiver #75270, when installed on your 2007 Honda Odyssey, to the ground is going to be approximately 12-3/4". Adding on a 350lb wheelchair and 56lb carrier #FHG99ZR is definitely going to…
view full answer...To flat tow your 2023 GMC Canyon Denali with a 2017 Tiffin Allegro, I recommend the following parts: Aluminum Tow Bar and Safety Chains - Roadmaster Sterling Tow Bar item #RM-576 and item #RM-674 Battery Disconnect - Roadmaster Battery Disconnect…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The Plug-In Wiring Harness #3064-P that you referenced is the correct brake controller harness for your 2019 Chevy Silverado 1500 and it is actually a brand new product for this generation of GM trucks (it currently only fits the 2019 model Silverado…
view full answer...The #3442 replacement sway control tab would be welded onto the side of a ball mount, and the 1-1/4 inch diameter trailer ball would mount in the 5/8 inch diameter hole in the tab. If a ball mount with a 3/4 inch rise or a 2 inch drop would work,…
view full answer...Hey Darryl, great question! The Tekonsha Prodigy RF #TK94FR isn't compatible with an electric-over-hydraulic braking system so you'll need to use a different controller. If you're wanting something that plugs into a 7-Way then I recommend…
view full answer...Yes, all hitches have a tongue weight and towing capacity weight rating for standard towing. However, some hitches additionally have adjusted tongue weight and towing capacity weight ratings when used in conjunction with a weight distribution hitch…
view full answer...A weight distribution system does not increase a hitch's tongue weight capacity. Rather, it takes weight off of the tongue, helping loads stay stable and level. In other words, if you use a trailer without a weight distribution system with a…
view full answer...As long as the app for the Curt Echo #C51180 is running in the background of your phone the manual override part #C83HR is going to work. It would require you killing the app for it to stop working.
view full answer...If your 7-way only has the 4-pole connector running to it and there isn't a fused line ran from it to the battery then you only have light functions going back to the trailer and nothing sending power for the brake controller to actually…
view full answer...To add a hitch to your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity…
view full answer...The connector you are looking for that has the red and blue wires is in the driver side frame rail near the rear of the vehicle. Check out the video I attached that shows where it is at right around the 2 minute mark. I also attached a picture of…
view full answer...