bing tracking image

B and W Gooseneck Hitch Safety Chain Kit Installation - 2019 Ford F-350 Super Duty

content loading

Customers compare BWGNXA2061 to these similar products




Products Featured in this Video



How to Install the B and W Gooseneck Hitch Safety Chain Kit on a 2019 Ford F-350 Super Duty


2019 Ford F-350 Super Duty. We're going to be taking a look at. I'm going to show you how to install the B and W Ball Safety Chain Kit, part number BWGNXA2061.This is what our goose necked ball and safety chain tie downs look like when they're installed in the back of our truck. What I really like about this setup is how easy they are to put in and take out. They're very simple and what's going to set these apart from others is that they're not going to have any pins or clips that we're going to have to worry about losing or taking out.You simply lift, twist, and you pull them out. Same way when they go in.

You lift, wrap it into place, twist and drop it. It's nice and tight.You can see it's got a very large opening for different size hooks. For some of your bigger hooks that are out there, you can see you've got plenty of room.As far as the coating goes, it's going to be a very durable steel construction and you can see the coating on it is very thick, so we're not going to have to worry about any rust or corrosion.One thing that's really going to set this ball apart from others is the handle. To get it out or to remove the ball, simply push on the lever, lift the handle and pull out the ball. What's nice about the handle is it's going to allow you to keep your hands clean when putting the ball in or removing it.

A lot of your goosenecks may have grease to help that ball rotate easily.Out handle when put in the locked position is going to lock the two ball bearings out, which will lock our ball down inside of our gooseneck prep pad.Our ball's going to be two and five sixteenths. It's going to have a 30 thousand pound max towing capacity. It's always recommended that you check the owner's manual of the vehicle to make sure the vehicle can withstand that amount of weight. You always want to go with the lowest number between the vehicle and the ball.Our kit's also going to come with a nice storage case that we can put anywhere inside of our vehicle, behind our seat, maybe under the seat so we have it for next time. It's also going to come with a nice removable cap that fits in place of your ball when not being used to help protect your hole from any dirt and debris, and also, it's going to give you total bed access.That will do it for a look at an installation on the B and W Ball and Safety Chain Kit, part number BWGNXA2061 on our 2019 Ford F-350 Super Duty..


Questions and Comments about this Video

Info for this part was:

Employee Joshua S
Video by:
Joshua S
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Randy B
Test Fit:
Randy B
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Adam E
Test Fit:
Adam E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.