Brake Controller Installation - 1995 Ford E-350 Van

content loading

How to Install a Brake Controller on a 1995 Ford E-350 Van


Today on this 1995 Ford e350 van, we're going to be installing the prodigy brake controller with harness part number 90885-3035p. With this Ford van having a pre-existing brake control plug in for it, we're actually starting our install off underneath the dash and we want to go ahead and locate that port, now if you go and locate the brake pedal and just over to the left here, taped to the main firing lead is our grey port for our brake controller. From there we just go ahead and take our brake control plug and go ahead and install it to the brake control port in the van. Alright the next thing we're going to do is go ahead and determine where we want to go ahead and mount the brake controller. So we're going to look for a flat surface here that's not angled too much and part over here to the right of the steering column looks like a good spot. I think we're going to go ahead and mount it in this area right here and we'll go ahead and use the provided hardware to mount it.

It is always a good idea to go ahead and check behind the area you're going to be drilling first, just to make sure you're not going to hit any electrical components. Alright with the bracket mounted, we just go ahead and mount the prodigy next. And you can see the bracket does have two sets of screws and you can kind of adjust the depth away from the dashboard. Alright and with that mounted the only we have to go ahead and do is plug the harness into the backside of the prodigy and with that that will conclude the installation of the prodigy p2 brake controller part number 90885-3035p.


Questions and Comments about this Video