CIPA Clamp on Universal Fit Towing Mirror Installation - 2018 Toyota Highlander

content loading

Customers compare CM11980-2 to these similar products




Products Featured in this Video




How to Install the CIPA Clamp on Universal Fit Towing Mirror on a 2018 Toyota Highlander


Speaker 1: Today we're going to be test fitting CIPA's clamp on towing mirror, part number CM11980. These also come in a quantity of two with part number CM11980-2. As you can see here, I'm clearly visible in our factory mirror, but as I take a step towards the outside I'm no longer visible in our factory mirror, but I can be clearly be seen in our universal towing mirror. This is particularly useful when merging onto the highway, changing lanes, and during parking maneuvers. This large mirror can be adjusted both vertically and horizontally. It can also be extended by loosening the nut located on the rod here and then pulling the mirror out.

You can then tighten it back down. This is going to help get that proper fit for your vehicle and also for getting that mirror out to the location you need to see depending on how wide your trailer is.The clamp on the back will also give you further adjustment by allowing you to turn it as you need it. You can tighten it back down. To achieve that perfect vision, you can also rotate it to however you desire. It clamps onto your mirror, and the rubber pads located on each of the clamps will prevent any scratches or abrasions occurring on your mirror.

While it's installed, you can still break away your mirror, and it won't contact the vehicle. It's going to give you enough adjustment to be able to see for any length or size trailer that you may have. One of the things that I like about this is that it really quickly installs. You slide it in and tighten it down.We'll begin our installation by loosening the bolts of the clamps and sliding it on the mirror. We'll then adjust it out to the position we want it and tighten them down.

You repeat this same process on the other side. That completes our test fit of CIPA's clamp on towing mirror on our 2018 Toyota Highlander.


Questions and Comments about this Video

Info for these parts were:

Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Hayden R
Test Fit:
Savanna B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Adam E
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video by:
Andrew K
Video by:
Jonathan Y
Video by:
Robert C
Video by:
Aidan B
Video by:
John S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.