CIPA Clamp On Universal Fit Towing Mirror Installation - 2019 Toyota Highlander

content loading

Customers compare CM11980-2 to these similar products




Products Featured in this Video




How to Install the How to Install a CIPA Clamp On Universal Fit Towing Mirror on a 2019 Toyota Hig


Hi there, Highlander owners. Today, in your 2019 Toyota Highlander, we're going to be taking a look at Cipa's clamp-on towing mirror. As you can see here, I'm clearly visible in our factory mirror, but as I take a step towards the outside, I'm no longer visible in our factory mirror, but I'm clearly visible in our universal towing mirror. This is particularly useful when merging onto the highway as well as when changing lanes. Our mirror is adjustable both vertically and horizontally. It can also be twisted to suit your needs.

It's slightly offset, so if you need more mirror at the top, you can run it like that. If you need more mirror down low, you can run it like that.While our mirror is installed, we'll still have full adjustability of our factory mirror and the breakaway function still works, so it can fold in if need be. The mirror is held in place using the two clamps located on the top. They use thumb screws to tighten it down and rubberized pads are located on the ends to ensure no scratches or abrasions occur to your mirror. This is a good entry-level towing mirror that's going to provide you with that extra vision you need when towing.

It comes as a quantity of one, but if you need two, one for each side, you can pick that up as a package here at etrailer.com.We'll begin our installation by taking our mirror and hooking the clips on the top of our mirrors. If you need to, you can loosen them up and then just tighten the knobs down and it'll clamp it tight onto the top. You can unloosen the know here, and this will allow you to adjust the length, how far your mirror sticks out. We're going to go ahead and bring ours way in, and then you can tighten it back down to hold it in place.And that completes our look at Cipa's clamp-on towing mirror on our 2019 Toyota Highlander.


Questions and Comments about this Video

Info for these parts were:

Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Hayden R
Test Fit:
Savanna B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Adam E
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video by:
Andrew K
Video by:
Jonathan Y
Video by:
Robert C
Video by:
Aidan B
Video by:
John S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.