bing tracking image

CIPA UTV Adjustable Left Hand Side Mirror Installation - 2014 Polaris Ranger

content loading

Customers compare CMM37 to these similar products




Products Featured in this Video



How to Install the CIPA UTV Adjustable Left Hand Side Mirror on a 2014 Polaris Ranger


Today on this 2014 Polaris Ranger Crew 570 were going to install part number CMM37. This is the Cipa UTV adjustable side mirror for the left hand side. Its very easy to assemble. We just have the one clamp shown here. You can see how our hardware is loosely installed together to see how it all goes. Well go ahead and take that apart and well go ahead and install the clamp onto the roll cage.

We have to spread it apart a little bit to work around the roll cage. Theres also a rubber sleeve giving you the grip that well remove for now to make sure we have the clamp wide enough. Once we have the clamp wide enough well go ahead and reinstall the rubber strap and then put it around for good. Now when we do this, this will distort the clamp a little bit, so the holes wont exactly line up. Were using an alignment tool to help maneuver it back into position.

This can be easily done with a screwdriver as well.Now well take the hardware apart and then through the holes through the clamp well install the machine mount. On the inside will get a lock washer and the outside will get a lock washer, and then a nut. Once we have it loosely installed and taken up some of the slack well go ahead and install the mirror assembly onto the machine mount. Well go ahead and run the mirror in a few threads to help hold everything together. Then well go ahead and start tightening down our hardware.

First off well tighten down our adjusting nut a little bit more, then well tighten down the clamp until we have it good and snug, and then well go ahead and thread the mirror assembly a little bit more. Well go ahead and keep rotating it until it bottoms out and stops. We dont want to push it any more harder than that. Then well rotate it and move it as needed, and then go ahead and tighten it down for good. In a few minutes our mirrors already installed.

Well go ahead and take it for a test drive and see how it rides with the UTV. With that, that will finish it for part number CMM37 from Cipa, the UTV adjustable side mirror for the left hand side on our 2014 Polaris Ranger Crew 570. .


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Jacob T
Video by:
Jacob T
Employee Andrew L
Video by:
Andrew L
Employee Sue W
Video Edited:
Sue W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.