bing tracking image

Convert-A-Ball Pintle Mounting Bar Review - 2006 Ford F-150

content loading

Customers compare AMPC2 to these similar products




Products Featured in this Video



Review of the Convert-A-Ball Pintle Mounting Bar on a 2006 Ford F-150


Today on our 2006 Ford F150, we'll be test fitting the convert-a-ball cushioned adjustable pintle mounting bar for two-inch hitches rated at 10,000 pounds, part number ampc2. Before we being our test fit, we will first to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height measurement for this vehicle is about 19 and 1/4 of an inch. Keep in mind this measurement may vary due to tire size, hitch style, or other after-market accessories. We'll now begin our test fit in the drop position by sliding the shank of the mounting bar into the opening of the hitch and securing it with the pin and clip. With it in the drop position, we can then measure from the ground to the center of the second set of holes from the bottom. This measurement is about 15 and 1/4 of an inch. From the third set of holes from the bottom, is about 17 and 1/4 of an inch.

If your vehicle's hitch height matches ours, and your trailer's ride height matches either of these two measurements, this should be an appropriate mounting bar for you. We can now flip the mounting bar over into the rise position and again measure from the ground to the center of the second hole from the bottom. We'll get a measurement of about 18 and 3/4 of an inch. From the ground to the center of the third set of holes from the bottom, is about 20 and 3/4 of an inch. Once again, if your trailer's ride height matches either of these two measurements, this should be an appropriate mounting bar for you. That'll complete today's test fit for the convert-a-ball cushioned adjustable pintle mounting bar for two-inch hitches, part number ampc2 on our 2006 Ford F150. .


Info for this part was:

Employee Patrick B
Video Edited:
Patrick B
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Sue W
Video Edited:
Sue W
Employee Rick A
Test Fit:
Rick A
Employee Matthew K
Test Fit:
Matthew K
Employee Cole B
Test Fit:
Cole B
Employee Randy B
Test Fit:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.